Solved

PC Anywhere access from outside router.

Posted on 2004-09-26
4
486 Views
Last Modified: 2013-11-30
I have PC Anywhere setup on two networks.  I am unable to gain access from outside the router at either location.  I'm pretty sure I have all the ports set up properly, it was working for a time.  It still works just fine from inside the router.  What am I missing?
0
Comment
Question by:gzp123
  • 3
4 Comments
 
LVL 49

Accepted Solution

by:
sunray_2003 earned 500 total points
ID: 12154801
0
 
LVL 49

Expert Comment

by:sunray_2003
ID: 12154881
gzp123,
>  it was working for a time.  I

Make sure to check with network administrator or system administrator , if any changes have been made to the network.
if you are in total control of the network , did you install any new software or tweak anything in the firewall .

Check if there is any change in the router configurations .

Did you update any software or add any fix to windows OS ?

You may want to reset all configurations and start over again to see if that helps.
0
 

Author Comment

by:gzp123
ID: 12155726
Did not answer my question directly, but the link suggested updating the firmware of my router and it seems that solved the problem.  Thanks.
0
 
LVL 49

Expert Comment

by:sunray_2003
ID: 12155731
very good
0

Featured Post

Enabling OSINT in Activity Based Intelligence

Activity based intelligence (ABI) requires access to all available sources of data. Recorded Future allows analysts to observe structured data on the open, deep, and dark web.

Join & Write a Comment

SSL is a very common protocol used these days when browsing the web.  The purpose is to provide security to communication, but how does it do it?  There are several pieces at work that have to be setup before SSL will even work and it requires both …
PRTG Network Monitor lets you monitor your bandwidth usage, so you know who is using up your bandwidth, and what they're using it for.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

705 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

14 Experts available now in Live!

Get 1:1 Help Now