Solved

How to Flush Buffer Cache on HP 810c Printer After Cancelling Print Job

Posted on 2004-09-27
4
3,494 Views
Last Modified: 2013-12-15
Does anyone know how to explicitly flush or clear the printer cache for the HP Deskjet 810c printer?

I am looking for something more than just "Cancelling" the print jobs in printer properties.  This shows "Deleting" but the printer still receives the data stream.  I want to clear that data stream.

I have tried removing the parallel port cable while printing.  This did not work.  
Also, when I pull the paper from the tray, the second light will blink orange.  I then cycle power and repeat a couple times.  Sometimes this will work, but not always.  

Any other ideas?  Thanks.
0
Comment
Question by:WizeOwl
  • 2
4 Comments
 
LVL 13

Accepted Solution

by:
WillHudson earned 150 total points
ID: 12167552
0
 

Assisted Solution

by:LANTIN
LANTIN earned 75 total points
ID: 12285106
If you're running Win NT, 2k, 2k3 or XP you should try to restart the spooler service.
This can be done by typing thoses commands in a command prompt :

NET STOP SPOOLER

then

NET START SPOOLER
0
 
LVL 13

Expert Comment

by:WillHudson
ID: 12287654
Thats what is says on the article i posted...
0
 

Author Comment

by:WizeOwl
ID: 12292183
While Will's comments solves the issue, Lantin's comment adds simplicity to it's implementation.  I will award points to both in this case.  Thank you for your input.
0

Featured Post

Portable, direct connect server access

The ATEN CV211 connects a laptop directly to any server allowing you instant access to perform data maintenance and local operations, for quick troubleshooting, updating, service and repair.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

How to solve seemingly unsolvable printer issues. Users sometimes run into printing issues where all the normal steps do not seem to work. Well the steps below can show users how to take one extra step beyond the normal steps needed to remove old…
When you try to share a printer , you may receive one of the following error messages. Error message when you use the Add Printer Wizard to share a printer: Windows could not share your printer. Operation could not be completed (Error 0x000006…
Established in 1997, Technology Architects has become one of the most reputable technology solutions companies in the country. TA have been providing businesses with cost effective state-of-the-art solutions and unparalleled service that is designed…
In an interesting question (https://www.experts-exchange.com/questions/29008360/) here at Experts Exchange, a member asked how to split a single image into multiple images. The primary usage for this is to place many photographs on a flatbed scanner…

856 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question