Solved

DFE-690TXD -  dos driver - ghosting

Posted on 2004-09-28
5
401 Views
Last Modified: 2012-05-05
Where/how can I get a DOS driver for the DFE-690TXD card needed for creating/ adding a template
for ghosting ?  Ghost 8.0 Enterprise Ed.
0
Comment
Question by:rexman
  • 2
5 Comments
 

Accepted Solution

by:
TylerDurdon earned 125 total points
ID: 12171991
0
 

Expert Comment

by:TylerDurdon
ID: 12172069
Also here:
http://www.network-drivers.com/companies/327.htm

(do a search on that page for DFE-690).  This one has 98 and XP drivers, but it looks like D-link should include the DOS ones somewhere in there (I would imagine with the 98 driver)
0
 
LVL 1

Expert Comment

by:ProperMethodz
ID: 12172640
Just to fill my own curiosity... why do you need a DOS driver?
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Layer 2 versus layer 3 10 89
Cisco Policy based routing 2 40
Cisco WAP POE power 28 80
Switch ports not working 8 34
If your business is like most, chances are you still need to maintain a fax infrastructure for your staff. It’s hard to believe that a communication technology that was thriving in the mid-80s could still be an essential part of your team’s modern I…
Join Greg Farro and Ethan Banks from Packet Pushers (http://packetpushers.net/podcast/podcasts/pq-show-93-smart-network-monitoring-paessler-sponsored/) and Greg Ross from Paessler (https://www.paessler.com/prtg) for a discussion about smart network …
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

810 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question