The subnet calculator helps you design networks by taking an IP address and network mask and returning information such as network, broadcast address, and host range.
One of a set of tools we're offering as a way of saying thank you for being a part of the community.
TFTP Issue
I don't know a better place to ask this question so even a redirection could get some points.
I have a Lantronix Xport device that works perfectly in the system in which it is installed. I can tftp this device from 3 other computers on the network but not my own. I can talk to the device as a com port but when I try to upload an http doc I get the following error message:
tftp: tftp/udp: unknown service
MightworkSoft MSDN website give the following explanation:
"...To transfer files to or from a remote computer using the TCP/IP Tftp command, the remote computer must have Ftp server running. It does not..."
However, as I said, three other computers on the same network have no trouble at all. I can't see any differences between the setups to account for this. Any ideas?
I have a Lantronix Xport device that works perfectly in the system in which it is installed. I can tftp this device from 3 other computers on the network but not my own. I can talk to the device as a com port but when I try to upload an http doc I get the following error message:
tftp: tftp/udp: unknown service
MightworkSoft MSDN website give the following explanation:
"...To transfer files to or from a remote computer using the TCP/IP Tftp command, the remote computer must have Ftp server running. It does not..."
However, as I said, three other computers on the same network have no trouble at all. I can't see any differences between the setups to account for this. Any ideas?
Asked:
2-
2
1 Solution
Hi 1stITMAN
Actually, I fixed the problem myself by uninstalling the simple TCP/IP services and reinstalling the TCP/IP protocol.
After that, no problem at all.
Thanks for your input
Actually, I fixed the problem myself by uninstalling the simple TCP/IP services and reinstalling the TCP/IP protocol.
After that, no problem at all.
Thanks for your input
I had the same problem, I checked what was happening with FileMon and somehow the path had been screwed up, it was looking for the services file in <current_directory>\%SYSTE
Question has a verified solution.
Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.
Have a better answer? Share it in a comment.
Join & Write a Comment Already a member? Login.
Featured Post
Tackle projects and never again get stuck behind a technical roadblock.
Join Now
What three machines are these ,, OS version??
What patches are installed???
Is there any differrence between the workstations..
Try Cross over cable just between that workstation and the FTP.. and see what happens..