?
Solved

I COnnected to VPN...now what do i do

Posted on 2004-10-04
1
Medium Priority
?
200 Views
Last Modified: 2010-03-18
I COnnected to VPN...now what do i do....it shows its connected and everything is fine. I tried to ping a computer at the office, it doesnt ping. I actually tried to ping the server its connected to ..no answer, i cant get into the comoputers at the office anymore than i could before and it shows its connected..how does it work? someonme please help!! I'm using windows 2003 server and xp as the client. I set up RAS and connected to it.
please help


a
0
Comment
Question by:mrperfect75000
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
1 Comment
 
LVL 15

Accepted Solution

by:
adamdrayer earned 150 total points
ID: 12237572
you may need to configure a static route to your computers at the office if the following are both true:

a. your office computers use a internal network addressing scheme (192.168.x.x, 10.x.x.x, or 172.16-32.x.x)
b. your VPN does not issue this static route by default to VPN clients


after connecting to the VPN type the following at a command prompt:
ROUTE ADD w.w.w.w MASK x.x.x.x y.y.y.y

where
w.w.w.w = the IP address of the network portion of your office Segment (should end in at least one '0')
x.x.x.x =  the subnet mask of your office
y.y.y.y = the public IP address of the VPN you are connecting to

here's how it would look if your computer at work ranged from 192.168.1.1 to 192.168.1.254
route add 192.168.1.0 mask 255.255.25.0 y.y.y.y
(don't your your VPN device's IP address)
0

Featured Post

Independent Software Vendors: We Want Your Opinion

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

FIPS stands for the Federal Information Processing Standardisation and FIPS 140-2 is a collection of standards that are generically associated with hardware and software cryptography. In most cases, people can refer to this as the method of encrypti…
An article on effective troubleshooting
Michael from AdRem Software explains how to view the most utilized and worst performing nodes in your network, by accessing the Top Charts view in NetCrunch network monitor (https://www.adremsoft.com/). Top Charts is a view in which you can set seve…
In this video, Percona Director of Solution Engineering Jon Tobin discusses the function and features of Percona Server for MongoDB. How Percona can help Percona can help you determine if Percona Server for MongoDB is the right solution for …

801 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question