Solved

Cisco 1548M Connecting VLANs Together

Posted on 2004-10-05
3
455 Views
Last Modified: 2010-03-18
I've been able to create separate VLANs w/ my Cisco 1548M switch, but how can I interconnect these separate VLANs?
0
Comment
Question by:davegaff
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
3 Comments
 
LVL 5

Expert Comment

by:abu_deep
ID: 12244149
u have to use a router...
0
 

Author Comment

by:davegaff
ID: 12244284
I'm not quite sure if I understand... where does the router hook up to...

For example... 1 side of the router in Port 1 (VLAN #1) of the switch and the other side of the router in Port 2 (VLAN #2) of the switch?  Then I can connect any nodes to any other ports that are either VLAN 1 or 2 and they'll be able to communicate thru the router?
0
 
LVL 5

Accepted Solution

by:
abu_deep earned 50 total points
ID: 12244610
yes but As long as uconfigured to use the router address on VLANs as their gateway, the router will happily excahnge packets with the other VLANs -- which it knows about because it has interfaces on those VLANs, too.
0

Featured Post

Industry Leaders: We Want Your Opinion!

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

FIPS stands for the Federal Information Processing Standardisation and FIPS 140-2 is a collection of standards that are generically associated with hardware and software cryptography. In most cases, people can refer to this as the method of encrypti…
We recently endured a series of broadcast storms that caused our ISP to shut us down for brief periods of time. After going through a multitude of tests, we determined that the issue was related to Intel NIC drivers on some new HP desktop computers …
Michael from AdRem Software explains how to view the most utilized and worst performing nodes in your network, by accessing the Top Charts view in NetCrunch network monitor (https://www.adremsoft.com/). Top Charts is a view in which you can set seve…
This is my first video review of Microsoft Bookings, I will be doing a part two with a bit more information, but wanted to get this out to you folks.

717 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question