Solved

openning ports in isa server

Posted on 2004-10-06
1
416 Views
Last Modified: 2013-11-16
hi everybody
i have problems trying to open ports in my isa server
i'm trying to open the port 1433 (SQL)
somebody can tell how i can do that step by step:
this is my complete problem
down my isa server i have a sql server.
so i want to access my sql server from out that network
using an ip address.
thanks a lot
Gustavo
0
Comment
Question by:albertorp
1 Comment
 
LVL 12

Accepted Solution

by:
Mazaraat earned 250 total points
ID: 12242753
This is bad =)

You don't want to have a direct connection to your SQL DB server from the outside.  I would recommend creating a VPN connection to the ISA server then you should be able to connect to your SQL.

In case you need it here is how to Setup VPN for ISA:

http://www.isaserver.org/tutorials/Configuring_ISA_Server_For_Inbound_VPN_Calls.html

More Good Info:
http://www.windowsecurity.com/articles/Configuring_ISA_Server_For_Inbound_VPN_Calls.html
http://www.isaserver.org/tutorials/dhcpoptions.html
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

This is an article about my experiences with remote access to my clients (so that I may serve them) and eventually to my home office system via Radmin Remote Control. I have been using remote access for over 10 years and have been improving my metho…
Data center, now-a-days, is referred as the home of all the advanced technologies. In-fact, most of the businesses are now establishing their entire organizational structure around the IT capabilities.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

930 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

12 Experts available now in Live!

Get 1:1 Help Now