?
Solved

How do I use a F221m Ericsson GPRS modem with a Freescale (motorola) 68HC908AP64 (HC08 Family) microcontroller.

Posted on 2004-10-08
1
Medium Priority
?
447 Views
Last Modified: 2013-12-09
I know how to use the serial port of the microcontroller.  But I do not know what commands to use, or in what form, to control the modem, and send TCP/IP packets over a GPRS server to a fixed IP server.

Do I simply write the AT Command to the microcontroller port?

Thank you in advance!!!!
0
Comment
Question by:SOLINA_CORP
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
1 Comment
 
LVL 3

Accepted Solution

by:
jenmir earned 1500 total points
ID: 12302513
Reference http://www.powertec.com.au/download/docs/UGF221m.pdf (3rd party vendor)

See my response also to your 2nd question.

Your Ericsson device supports all AT commands for GSM - see GSM 07.07 standard.
http://www.3gpp.org/ftp/Specs/archive/07_series/07.07/ 
( yeah I know 3gpp isn't really gsm but it's faster to find the docs on their web site and they're the same ones )
GPRS specific commands start sec. 10 .

Also your device supports SMS command set for AT as well. See GSM 07.05 for that one.

Keep in mind if you use GPRS data on that product you only get outgoing only (one-way) transmission. If you use GSM then you can do incoming and outgoing data calls, but it would probably be slower. Consider your design before deciding on GPRS.

j.m.
0

Featured Post

Microsoft Certification Exam 74-409

Veeam® is happy to provide the Microsoft community with a study guide prepared by MVP and MCT, Orin Thomas. This guide will take you through each of the exam objectives, helping you to prepare for and pass the examination.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Coaxial cable bending There are several factors that govern the selection of coaxial cable for your Machine to Machine (M2M) application: the location of cable runs, either indoor or outdoor, inside or outside an enclosure, maximum bending and the…
This article is a step by step guide on how to create a basic PTP link using Ubiquiti airOS devices. This guide can be used on the following Ubiquiti AirMAX devices. Nanostation, Bullets, AirBridge, Nanobeam, NanoBridge to name a few. Please review …
This Micro Tutorial will show you how to maximize your wireless card to its maximum capability. This will be demonstrated using Intel(R) Centrino(R) Wireless-N 2230 wireless card on Windows 8 operating system.
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…

762 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question