Solved

Event id 1030 and 1058 on XP Machines

Posted on 2004-10-12
5
268 Views
Last Modified: 2010-04-10
Scenario

I get these in my event log

Event Type:Error
Event Source:Userenv
Event Category:None
Event ID: 1058
Date:05/02/2003
Time: 10:48:26
User:  NT AUTHORITY\SYSTEM
Computer:TECHNICIAN
Description:
Windows cannot access the file gpt.ini for GPO CN={31B2F340-016D-11D2-945F-00C04FB984F9},CN=Policies,CN=System,DC=curriculum. The file must be present at the location <\\curriculum\sysvol\curriculum\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\gpt.ini>. (The network path was not found. ). Group Policy processing aborted.

******************************

Event Type: Error
Event Source: Userenv
Event Category:   None
Event ID: 1030
Date:  05/02/2003
Time: 10:48:26
User: NT AUTHORITY\SYSTEM
Computer: TECHNICIAN
Description:
Windows cannot query for the list of Group Policy objects. A message that describes the reason for this was previously logged by the policy engine.

*************************************************

I have tried the solution in
http://www.experts-exchange.com/Operating_Systems/Q_20738632.html 

It hasn't helped... I got the pair of errors 5 mins ago
0
Comment
Question by:jibranilyas
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 3
  • 2
5 Comments
 
LVL 10

Expert Comment

by:ngravatt
ID: 12289619
try this:

http://support.microsoft.com/default.aspx?kbid=834649

RESOLUTION
To resolve this issue, make sure the DFS service is started on the domain controller, and set the Startup type to automatic. To do this, follow these steps:
1.      Click Start, point to Programs, point to Administrative Tools, and then click Services.
2.      In Services, double-click Distributed File System.
3.      On the General tab, click Automatic next to Startup type.
4.      Under Service Status, click Start if the service is not started.
5.      Click OK, and then close the Services window.
0
 
LVL 10

Expert Comment

by:ngravatt
ID: 12289638
oh, i just read.  The resolution steps have to be performed on the Domain Controller.
0
 

Author Comment

by:jibranilyas
ID: 12289649
i did that at both the machines... my desktop and the server..

actually, they were both started.. i onlyrestarted them
0
 
LVL 10

Accepted Solution

by:
ngravatt earned 500 total points
ID: 12289975
ok, did you try this: ?

http://support.microsoft.com/default.aspx?scid=kb;EN-US;314494

RESOLUTION
To resolve this issue, turn on the DFS client. To do this, follow these steps.

Warning If you use Registry Editor incorrectly, you may cause serious problems that may require you to reinstall your operating system. Microsoft cannot guarantee that you can solve problems that result from using Registry Editor incorrectly. Use Registry Editor at your own risk.
1.      Click Start, and then click Run.
2.      In the Open box, type regedt32, and then click OK.
3.      In the Registry Editor window, locate the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Mup
4.      In the right details pane, double-click DisableDFS.

The DFS client is turned off if the value in the Value data box is 1.
The DFS client is turned on if the value in the Value data box is 0.
5.      In the Edit DWORD Value dialog box that appears, type 0 in the Value data box, and then click OK.
6.      On the File menu, click Exit to quit Registry Editor.
Additionally, turn on File and Printer Sharing for Microsoft Networks on the interface. To do this, follow these steps:
1.      Click Start, point to Connect To, and then click Show all connections.
2.      Right-click the appropriate connection, and then click Properties.
3.      Click the General tab.
4.      Under This connection uses the following items, verify that the check box next to File and Printer Sharing for Microsoft Networks is selected, and then click OK.
0
 

Author Comment

by:jibranilyas
ID: 12290561
yes, the DFSClient wasn't there,, so i had to add that Dword and put 0 as the value.

I haven't restarted the server since... I will post the update after i restart...

Thanks so much for your help so far
0

Featured Post

Connect further...control easier

With the ATEN CE624, you can now enjoy a high-quality visual experience powered by HDBaseT technology and the convenience of a single Cat6 cable to transmit uncompressed video with zero latency and multi-streaming for dual-view applications where remote access is required.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

#Citrix #Citrix Netscaler #HTTP Compression #Load Balance
When it comes to security, there are always trade-offs between security and convenience/ease of administration. This article examines some of the main pros and cons of using key authentication vs password authentication for hosting an SFTP server.
Get a first impression of how PRTG looks and learn how it works.   This video is a short introduction to PRTG, as an initial overview or as a quick start for new PRTG users.
This video gives you a great overview about bandwidth monitoring with SNMP and WMI with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're looking for how to monitor bandwidth using netflow or packet s…

739 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question