Solved

Extranet and Windows 2003 server

Posted on 2004-10-15
1
314 Views
Last Modified: 2010-08-05
I have a domain based setup in my home office NOW... finally... and what I am struggling with at this point is one of my workstations (Windows XP Pro) has Nortel Extranet Client on it to connect to an outside server. When connected to the main in-house server (Windows server 2003) it hangs on BannerSock and then gives and error that the VPN connection was lost. When connected directly to the internet, dial-up or broadband, it works and connects fine.

I have since learned that I would need to enable IPSEC tunneling, but I'm not exactly sure how or what port to pass through...

On the in-house server, there is DNS, DHCP, Active Directory, IIS 6, Wins, etc etc etc...

any suggestions?
0
Comment
Question by:dominomage
1 Comment
 
LVL 1

Accepted Solution

by:
HynesCo earned 250 total points
ID: 12351391
Hi Dominomage,

try this link out http://msdn.microsoft.com/library/default.asp?url=/library/en-us/secmod/html/secmod111.asp , also if your nortel Extrant client has am excelerator option make sure you turn it off.

HynesCo
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

One of the Top 10  common Cisco VPN problems are not-matching shared keys. This is an easy one to fix, but not always easy to notice, see the case below. A simple IPsec tunnel between fast Ethernet interfaces of routers SW1 (f1/1) and R1(f0/0). …
Juniper VPN devices are a popular alternative to using Cisco products. Last year I needed to set up an international site-to-site VPN over the Internet, but the client had high security requirements -- FIPS 140. What and Why of FIPS 140 Federa…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

810 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question