Solved

How "LABEL VOLD IDENTIFIED DVD DRIVE called unnamed_cdrom"?

Posted on 2004-10-19
7
350 Views
Last Modified: 2013-12-27
VOLD identify the dvd drive as /cdrom/unnamed_cdrom, how to I label the iomega dvd?
Do I need to format it?


Another basic question
There is /vol/dev/rdsk/c1t0d0/unkown_format
There is also use cdrom drive /dev/rdsk/c*s2 dev_cdrom.so cdrom%d in /etc/vold.conf

I suppose the above line in vold.conf is searching all attached to the server.

Do I need to format the DVD? It is already recoganized as /cdrom/unnamed_cdrom.
If not needed to format, how do I label it?


Thanks

0
Comment
Question by:marieshi
  • 3
  • 2
7 Comments
 

Author Comment

by:marieshi
ID: 12353808
I just noticed under
/cdrom

there is /cdrom/cdrom0  which is the first cdrom drive come with the server
and /cdrom/unamed_cdrom which is the second dvd drive attached to the USB port

But there isn't a /cdrom/cdrom1

But if I do #eject cdrom1, it works.

Any idea why there isn't /cdrom/cdrom1?

Thanks
0
 
LVL 38

Expert Comment

by:yuzh
ID: 12354504
when you use "eject" command use the Nickname or the real device name of the device.

man device

To learn more about how to use DVD:
http://docs.sun.com/db/doc/805-7228/6j6q7ueui?a=view

use CD/DVD burner:
http://www.ks.uiuc.edu/Development/Computers/docs/user/cd-burner.html
0
 

Author Comment

by:marieshi
ID: 12366803
I can't get it to work: try to use iomega dvd drive for solaris 9 from usb port connection.

This is what happend:
Happen @situation (1):
===============
#/etc/init.d/volmgt stop
#mount -F udfs /dev/dsk/c1t0d0s0 /dvd
udfs mount: /dev/dsk/c1t0d0s0 is not an udfs file system

#eject cdrom1
cdrom1: No such file or directory

This is what happend:
Happen @situation (2):
================
#/etc/init.d/volmgt start
#mount -F udfs /dev/dsk/c1t0d0s0 /dvd
mount: /dev/dsk/c1t0d0s0 is already mounted, /dvd is busy or allowable number of mount points exceeded
it is not mounted from (#df -k) check

#eject cdrom1
cdrom1 which is the iomega dvd did ejected.

If I want to label the DVD ROM
======================
#lableit -F UDFS /dev/rdsk/c1t0d0s0 cdrom1 test
labelit: FSType UDFS not installed in the kernel.

What should I do. I have Solaris 9 12/02.
I searched on sunsolve.sun.com, Solaris 7 needs a patch for UDFS related bug, but I have Solaris 9.

Help!

Thanks

Marie Shi

0
Is Your Active Directory as Secure as You Think?

More than 75% of all records are compromised because of the loss or theft of a privileged credential. Experts have been exploring Active Directory infrastructure to identify key threats and establish best practices for keeping data safe. Attend this month’s webinar to learn more.

 

Author Comment

by:marieshi
ID: 12367080
Correction:

#labelit -F udfs /dev/dsk/c1t0d0s0 cdrom1 test1  (this is what i got, udfs instead of UDFS from above.)
udfs labelit: cannot open </dev/dsk/c1t0d0s0> errorno <16>


Thanks

Marie
0
 
LVL 38

Expert Comment

by:yuzh
ID: 12367214
0
 

Accepted Solution

by:
modulo earned 0 total points
ID: 12807767
PAQed with points refunded (500)

modulo
Community Support Moderator
0

Featured Post

Is Your Active Directory as Secure as You Think?

More than 75% of all records are compromised because of the loss or theft of a privileged credential. Experts have been exploring Active Directory infrastructure to identify key threats and establish best practices for keeping data safe. Attend this month’s webinar to learn more.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

In tuning file systems on the Solaris Operating System, changing some parameters of a file system usually destroys the data on it. For instance, changing the cache segment block size in the volume of a T3 requires that you delete the existing volu…
This tech tip describes how to install the Solaris Operating System from a tape backup that was created using the Solaris flash archive utility. I have used this procedure on the Solaris 8 and 9 OS, and it shoudl also work well on the Solaris 10 rel…
This video shows how to set up a shell script to accept a positional parameter when called, pass that to a SQL script, accept the output from the statement back and then manipulate it in the Shell.
In a previous video, we went over how to export a DynamoDB table into Amazon S3.  In this video, we show how to load the export from S3 into a DynamoDB table.

895 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

11 Experts available now in Live!

Get 1:1 Help Now