Solved

error during whrite process with Nero: "Could not perform Endtrack"

Posted on 2004-10-20
13
2,334 Views
Last Modified: 2012-06-21
Hi,

I want to copy a CD.
During the  copy process I got the error: "Could not perform EndTrack".
> CDR = external SCSI HP CD-Writer+ 9600, firmware 1.0a
> Nero = 5.5.10.20

Coping the CD with another writer on another PC on media of the same box works just fine.


Let me know any other information is required.

Best regards,
Salvator
0
Comment
Question by:salvator
  • 6
  • 6
13 Comments
 

Accepted Solution

by:
MaximusTech earned 200 total points
ID: 12358038
 First try using a different brand of CD-R and see if Nero returns you the same message.

You can also try disabling Win XP's Built in Burning Program:

Start/Run

paste or type the following line

sc config imapi start= disabled

hit enter

Reboot

If for some reason you want to enable it again

sc config imapi start= demand


Are you just using Nero on this Machine?
For instance Roxio and Nero on the same machine will cause problems.

Is this a full version of Nero or a free trial version that came with the computer or download?

May also want to get the cleaning tool from Nero's website and clean it completely off you system and reinstall.
0
 

Author Comment

by:salvator
ID: 12358428
- I tried 2 brands: Imation and Sony: same message
- I'm running W2K
- Just Nero installed as CD burning software
- I just upgraded to the last Nero 6.3.1.20
- I found a lot of testamonials describing the same problem, but no one had the solution

Below you'll find a complete report

---===<<< START REPORT>>>===---

%MS.DOMAIN%
%MS.DOMAIN% AG & Co. KG
1A25-0600-7030-1673-1185-6393

Windows 2000 5.0
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 9:20:56
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 22/07/2004 17:33:44
Nero version: 6.3.1.20
Recorder:             <HP CD-Writer+ 9600>      Version: 1.0a - HA 2 TA 4 - 6.3.1.20
 Adapter driver:      <aic78xx>                 HA 2
 Drive buffer  :      4096kB
 Bus Type      :      default (0) -> SCSI, detected: SCSI
CD-ROM:               <Compaq   CD-ROM SC-148E  >Version: PC03 - HA 1 TA 0 - 6.3.1.20
 Adapter driver:      <atapi>                   HA 1

=== Scsi-Device-Map ===
DiskPeripheral       : ST320413A                        atapi Port 0 ID 0  DMA: On
CdRomPeripheral      : Compaq CD-ROM SC-148E            atapi Port 1 ID 0  DMA: Off
OtherPeripheral      : HP      C7670A          3945   aic78xx Port 2 ID 2  DMA: Off
CdRomPeripheral      : HP      CD-Writer+ 9600 1.0a   aic78xx Port 2 ID 4  DMA: Off

=== CDRom-Device-Map ===
Compaq CD-ROM SC-148E      E:   CDRom1
HP CD-Writer+ 9600         D:   CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (83886080) Byte
ShowDrvBufStat : 0
BUFE           : 0
Physical memory     : 254MB (260528kB)
Free physical memory: 35MB (35892kB)
Memory in use       : 86 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)

20.10.2004
CD Copy
15:33:23      #1 Text 0 File Reader.cpp, Line 126
      Reader running
      
15:33:23      #2 Text 0 File Writer.cpp, Line 124
      Writer HP       CD-Writer+ 9600  running
      
15:33:23      #3 Phase 48 File dlgbrnst.cpp, Line 1855
      Analyzing disc
      
15:33:25      #4 Text 0 File CDCopy.cpp, Line 1825
      session 0 (0 - 0): last session
      
15:33:25      #5 CDCOPY -1 File CDCopy.cpp, Line 1896
      The CD is copyrighted
      
15:33:25      #6 Text 0 File CDCopy.cpp, Line 2116
                _Index0_ _______Index1_______ PostPause   ___LastBlockOfTrack_
      Track  1:        0        0 (  0:02.00)    122432     122431 ( 27:14.31)
      
15:33:25      #7 Text 0 File CDCopy.cpp, Line 840
      Copy options:      copy on-the-fly:  ON
            read ISRC/MCN: OFF
            use jitter correction: OFF
            data options
                  ignore read error: OFF   write defekt blocks OFF
                  read raw data: OFF   read r-w subchannel data: OFF
            audio options
                  ignore read error: OFF
                  read indexes: OFF    read r-w subchannel data: OFF
      source disc does not look like CD Extra
      01.      0 - 122432 = 122432, data (TRM_DATA_MODE1, block size 2048)
      
15:33:25      #8 Text 0 File Burncd.cpp, Line 3173
      Turn on Disc-at-once, using CD-R/RW media
      
15:33:45      #9 Text 0 File DlgWaitCD.cpp, Line 247
      Last possible write address on media:   359848 ( 79:59.73)
      Last address to be written:             122431 ( 27:14.31)
      
15:33:45      #10 Text 0 File DlgWaitCD.cpp, Line 259
      Write in overburning mode: NO
      
15:33:45      #11 Text 0 File DlgWaitCD.cpp, Line 2162
      Recorder: HP CD-Writer+ 9600;
         CDR code: 00 97 22 67; OSJ entry from: Daxon Technology, Inc.
         ATIP Data:
           Special    Info [hex] 1: D0 00 A0, 2: 61 16 43 (LI 97:22.67), 3: 4F 3B 4A (LO 79:59.74)
           Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
      
15:33:45      #12 Text 0 File DlgWaitCD.cpp, Line 420
      >>> Protocol of DlgWaitCD activities: <<<
      =========================================
      Insert empty disc to write to.
            (Medium in drive: Unknown. Medium required by compilation: CD-R/RW.)
      
15:33:46      #13 Text 0 File ThreadedTransferInterface.cpp, Line 813
      Setup items (after recorder preparation)
       0: TRM_DATA_MODE1 (1 - Data (mode 1))
          2 indices, index0 (150) not provided
          original disc pos #0 + 122432 (122432) = #122432/27:12.32
          relocatable, disc pos for caching/writing not required/not required, no patch infos
          -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 122432 blocks [HP       CD-Writer+ 9600 ]
      --------------------------------------------------------------
      
15:33:49      #14 Text 0 File ThreadedTransferInterface.cpp, Line 984
      Prepare recorder [HP       CD-Writer+ 9600 ] for write in CUE-sheet-DAO
      DAO infos:
      ==========
       MCN: ""
       TOCType: 0x00; Session Closed, disc fixated
       Tracks 1 to 1:
         1: TRM_DATA_MODE1, 2048/0x00, FilePos             0        307200     251047936, ISRC ""
      DAO layout:
      ===========
       __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
          -150 |  lead-in |   0 |   0x00 |  0x41
          -150 |        1 |   0 |   0x00 |  0x41
             0 |        1 |   1 |   0x00 |  0x41
        122432 | lead-out |   1 |   0x00 |  0x41
      
15:33:49      #15 Phase 28 File dlgbrnst.cpp, Line 1855
      Speed measurement started
      
15:33:49      #16 Text 0 File ThreadedTransferInterface.cpp, Line 2344
      Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0
      
15:35:04      #17 Text 0 File WriterStatus.cpp, Line 115
      <HP       CD-Writer+ 9600 > start writing Lead-Out at LBA 122432 (1DE40h), lenght 0 blocks
      
15:35:04      #18 Text 0 File ThreadedTransfer.cpp, Line 229
      all writers idle, stopping conversion
      
15:35:04      #19 Text 0 File dlgbrnst.cpp, Line 1713
      Set remaining time: 0:00,000 (0ms) -> OK
      
15:35:04      #20 Phase 29 File dlgbrnst.cpp, Line 1806
      Speed measurement completed: 31.9x (4.796 KB/s)
      
15:35:04      #21 Phase 32 File dlgbrnst.cpp, Line 1855
      Simulation started at 12x (1.800 KB/s)
      
15:35:04      #22 Text 0 File ThreadedTransferInterface.cpp, Line 2344
      Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0
      
15:35:04      #23 Text 0 File Mmc.cpp, Line 15916
      StartDAO : CD-Text - Off
      
15:35:05      #24 Text 0 File Mmc.cpp, Line 16203
      CueData, Len=32
      41 00 00 14 00 00 00 00
      41 01 00 10 00 00 00 00
      41 01 01 10 00 00 02 00
      41 aa 01 14 00 1b 0e 20
      
15:35:29      #25 Text 0 File Cdrdrv.cpp, Line 1294
      15:35:29.382 - HP CD-Writer+ 9600\H2 T4 : Queue again later
      
15:37:58      #26 Text 0 File WriterStatus.cpp, Line 115
      <HP       CD-Writer+ 9600 > start writing Lead-Out at LBA 122432 (1DE40h), lenght 0 blocks
      
15:38:17      #27 Text 0 File ThreadedTransfer.cpp, Line 229
      all writers idle, stopping conversion
      
15:38:17      #28 Text 0 File dlgbrnst.cpp, Line 1713
      Set remaining time: 0:00,000 (0ms) -> OK
      
15:38:17      #29 Phase 33 File dlgbrnst.cpp, Line 1855
      Simulation completed successfully at 12x (1.800 KB/s)
      
15:38:18      #30 Phase 36 File dlgbrnst.cpp, Line 1855
      Burn process started at 12x (1.800 KB/s)
      
15:38:19      #31 Text 0 File ThreadedTransferInterface.cpp, Line 2344
      Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0
      
15:38:19      #32 Text 0 File Mmc.cpp, Line 15916
      StartDAO : CD-Text - Off
      
15:38:20      #33 Text 0 File Mmc.cpp, Line 16203
      CueData, Len=32
      41 00 00 14 00 00 00 00
      41 01 00 10 00 00 00 00
      41 01 01 10 00 00 02 00
      41 aa 01 14 00 1b 0e 20
      
15:39:04      #34 Text 0 File Cdrdrv.cpp, Line 1294
      15:39:04.101 - HP CD-Writer+ 9600\H2 T4 : Queue again later
      
15:39:06      #35 SCSI -1135 File Cdrdrv.cpp, Line 1442
      SCSI Exec, HA 2, TA 4, LUN 0, buffer 0x0AFC0000
      Status:     0x04 (0x01, SCSI_ERR)
      HA-Status   0x00 (0x00, OK)
      TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
      Sense Key:  0x03 (KEY_MEDIUM_ERROR)
      Sense Code: 0x0C
      Sense Qual: 0x08
      CDB Data:   0x2A 0x00 0x00 0x00 0x07 0x40 0x00 0x00 0x20 0x00
      Sense Data: 0xF1 0x00 0x03 0xFF 0xFF 0xD1 0x74 0x12
                  0x00 0x00 0x00 0x00 0x0C 0x08
      
15:39:06      #36 CDR -1135 File Writer.cpp, Line 304
      Write error
      
15:39:06      #37 Text 0 File ThreadedTransfer.cpp, Line 229
      all writers idle, stopping conversion
      
15:39:06      #38 Text 0 File ThreadedTransfer.cpp, Line 223
      conversion idle, stopping reader
      
15:39:06      #39 Text 0 File dlgbrnst.cpp, Line 1713
      Set remaining time: 0:00,000 (0ms) -> OK
      
15:39:06      #40 Phase 38 File dlgbrnst.cpp, Line 1855
      Burn process failed at 12x (1.800 KB/s)
      

Existing drivers:
File 'Drivers\CDR4_2K.SYS': Ver=5.3.2.31, size=58000 bytes, created 10/02/2004 16:52:55
File 'Drivers\CDRALW2K.SYS': Ver=5.3.2.31, size=23420 bytes, created 10/02/2004 16:52:55
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 17/07/2002 8:53:02
File 'Drivers\aic78xx.sys': Ver=v2.20b, size=56848 bytes, created 7/12/1999 13:00:00 (Adapter driver for rec)
File 'Drivers\atapi.sys': Ver=5.00.2195.5376, size=86704 bytes, created 22/07/2002 12:05:04 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


---===<<< END REPORT>>>===---

Thanks on forehand.
Best regards,
Salvator
0
 
LVL 11

Expert Comment

by:huntersvcs
ID: 12361833
Have you checked to see if a firmware update is available?  Have you attempted to burn at a slower rate ("Burn process failed at 12x")?

It may be that Nero 6.0 with update will solve your problem.
0
 
LVL 11

Expert Comment

by:huntersvcs
ID: 12361884
You mentioned:  "Coping the CD with another writer on another PC on media of the same box works just fine."

Does the other PC also use the same burner you are using?  That's why I mentioned the possible firmware update.  You might try first burning the CD to an image (stores it on the HDD) and then burning the session from the image.
0
 

Author Comment

by:salvator
ID: 12367445
Hi huntersvcs,

- I burned at 2x, 4x, 8x and 12x :  same error on all speeds
- I tried it with caching the CD to the HD first: same error
- I'm using 6.3.1.20 (latest ?). But it was working 1 week ago with version 5.5.10.20
- Since it worked 3 days ago I don't think installing a new firmware will solve the problem
- The other PC is using another drive.


BTW, If you check the internet you'll see dozens of people already tried these kind of things, but it never changed a thing.
0
 
LVL 11

Assisted Solution

by:huntersvcs
huntersvcs earned 300 total points
ID: 12368199
OK I searched the net and you were right - lots of people have had this problem mysteriously appear after months of having no problems at all.  A couple of things I did see that you might have missed:

Try using the WIZARD instead of manually burning.

Try connecting your PC directly to the wall socket (power) instead of over an extension cable.

Depending on what is connected (physically) to your PC, try disconnecting all devices and even swap out the mouse and keyboard with the ones being used on the other (working) PC.

Let me know if anything helped.
0
How to run any project with ease

Manage projects of all sizes how you want. Great for personal to-do lists, project milestones, team priorities and launch plans.
- Combine task lists, docs, spreadsheets, and chat in one
- View and edit from mobile/offline
- Cut down on emails

 

Author Comment

by:salvator
ID: 12378793
- I can't launch the Wizard. I can only choose between Nero and Nero Express
- Changing the powersocket and even cables wasn't much of a help
- Changing Keyboard & Mouse wasn't much of a help either

I made a copy of the CD on another drive. Then I tried to make a copy of that copy and that seems to work on 2x and 4x. It still fails on 12x.

So, I would say MY problem is solved, but THE problem is still no cleared out.

Sorry folks.

Huntersvcs,

Even if you did not solve my problem, I want to give you halve of the points as you were the only one who cared to answer.

Best regards,
Salvator
0
 
LVL 11

Expert Comment

by:huntersvcs
ID: 12379057
Thanks for the points.  Sorry that we couldn't help more.

I take it you've already tried Nero Express and it failed too?  If you could copy a copy but not an original, it sounds almost like a copyright thing.
0
 

Author Comment

by:salvator
ID: 12379259
No, it couldn't be copyright problem because then the copy wouldn't start at all.
Now it crached in the middle of the burning process.
And what about the copy I was able to make on another machine, also with Nero?
0
 
LVL 11

Expert Comment

by:huntersvcs
ID: 12381198
Way back when, they were putting the copyright protection features directly into the hardware.  That's why some burners worked while others didn't.

If it just crashed in the middle, check the EVENTS log (applications and system) to see if it registered anything.  Overheating?
0
 

Author Comment

by:salvator
ID: 12397874
I'm pretty sure it'n not copyright related because:
- I already copied protected CD's on that writer
- It worked last friday at 2x and 4x

I checked the logfile but couldn't find anything special. Maybe you can?
I posted the logfile above.

Best regards,
Salvator
0
 
LVL 11

Expert Comment

by:huntersvcs
ID: 12398083
You might try "Copy on the fly" off.  Usually, a burner starts at the highest speed and steps down, depending on the disk compatibility.  If it was a car, I'd say the switch was stuck!  I mentioned this because:

15:33:45     #12 Text 0 File DlgWaitCD.cpp, Line 420
     >>> Protocol of DlgWaitCD activities: <<<
     =========================================
     Insert empty disc to write to.
          (Medium in drive: Unknown. Medium required by compilation: CD-R/RW.)
0
 

Author Comment

by:salvator
ID: 12410882
Hi huntercvcs,

I tried that already before, but it made no difference at all...
Sorry.

For the record, I'm not looking for a "solution". Copying works now at 2x and 4x.
What bothers me is that nobody can tell me what happened or tell me what the source of the problem is.

Best regards,
Salvator
0

Featured Post

How to run any project with ease

Manage projects of all sizes how you want. Great for personal to-do lists, project milestones, team priorities and launch plans.
- Combine task lists, docs, spreadsheets, and chat in one
- View and edit from mobile/offline
- Cut down on emails

Join & Write a Comment

Solid State Drive Performance Tips: Solid state storage technology is now a standard.  After testing and using several different brands and revisions of SSD's over the years I have put together a collection of tips,tools and suggestions that I ha…
I previously wrote an article addressing the use of UBCD4WIN and SARDU. All are great, but I have always been an advocate of SARDU. Recently it was suggested that I go back and take a look at Easy2Boot in comparison.
This tutorial will walk an individual through the process of installing the necessary services and then configuring a Windows Server 2012 system as an iSCSI target. To install the necessary roles, go to Server Manager, and select Add Roles and Featu…
This Micro Tutorial will teach you how to reformat your flash drive. Sometimes your flash drive may have issues carrying files so this will completely restore it to manufacturing settings. Make sure to backup all files before reformatting. This w…

707 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

18 Experts available now in Live!

Get 1:1 Help Now