• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 326
  • Last Modified:

Using HP's Scanjet 6100C without ISA-slot

We had a old machine p1 to which my Hp scanjet6100c was connected. Now the P4 system does not have ISA slot. Kindly help us get it connected to  P4 system.
0
Nanasridhar
Asked:
Nanasridhar
1 Solution
 
improveyourpcCommented:
Nanasridhar,
It seems as if your scanner came with a SCSI-2, dedicated SCSI adapter (PC/Windows). You can buy a SCSI2 adapter card that fits in a PCI slot. Example:

http://www.pcwebshopper.com/iohc310.html

Your scanner uses a 50 pin SCSI2 connector. You will need to set the SCSI ID on the scanner, here is an explanation that deals directly with your scanner:

http://www.frostytech.com/articleview.cfm?articleid=414&page=2
0

Featured Post

Enhanced Intelligibility Without Cable Clutter

Challenge: The ESA office in Brussels wanted a reliable audio conference system for video conferences. Their requirement - No participant must be left out from the conference and the audio quality must not be compromised.

Tackle projects and never again get stuck behind a technical roadblock.
Join Now