Asus P5GD2 mobo BIOS: HELP!

Hi.

I have just built a new PC with an Asus P5GD2-deluxe mobo and am having a problem with the BIOS.

When starting up the system, the IDE scan detects my three installed devices correctly.

However, in the BIOS-setup no IDE devices are detected at all!

What's going wrong and how do I resolve the problem?

Advice much appreciated.

Regards,  TC.

PS. I'll give more points when I get them.
timclymaAsked:
Who is Participating?

[Webinar] Streamline your web hosting managementRegister Today

x
 
ee_ai_constructConnect With a Mentor Commented:
Question answered by asker or dialog valuable.
Closed, 20 points refunded.
ee_ai_construct (replacement part #xm34)
Community Support Admin
0
 
_Commented:
Is it set to AUTO?

Can you access them with a boot floppy or have you loaded an OS on it OK?
0
 
waffleironheadCommented:
make sure the ide channels are enabled

waffle
0
 
ddrdanCommented:
Check the Ribbon cables. The red line side should be located next to the power plug of the IDE device (pin 1).

0
 
timclymaAuthor Commented:
Hi.

Thanks for the good advice guys.

I have resolved the problem myself  however: I disabled the onboard IDE/RAID controller and this allowed the devices to be seen.

Regards, TC.
0
All Courses

From novice to tech pro — start learning today.