Solved

VPN

Posted on 2004-10-20
3
356 Views
Last Modified: 2013-11-16
How difficult is it to set up a vpn server on win2k. I have some knowledge in networking, but I have never set up a VPN. Does the server have to be a domain? When I set this server up I did not use active directory. I am going to use a DSL connection with 5 static IP addresses. I do know that I have to add another NIC. One for the LAN and one for the VPN.
0
Comment
Question by:LarryMB
  • 2
3 Comments
 
LVL 6

Expert Comment

by:gjohnson99
Comment Utility
If you have the updates it not hard

you do not need a domain.

you do not need to add a nic.  
0
 
LVL 1

Author Comment

by:LarryMB
Comment Utility
Any ideas on wherre I could get good readable Instructions?
Will the clients on the LAN still be able to access the internet through one NIC
0
 
LVL 6

Accepted Solution

by:
gjohnson99 earned 125 total points
Comment Utility
I would just install the service and it has good build in help

It about the same as for windows 2000

http://www.microsoft.com/windowsserver2003/technologies/networking/vpn/default.mspx
0

Featured Post

Maximize Your Threat Intelligence Reporting

Reporting is one of the most important and least talked about aspects of a world-class threat intelligence program. Here’s how to do it right.

Join & Write a Comment

Suggested Solutions

To setup a SonicWALL for policy based routing to be used with the Websense Content Gateway there are several steps that need to be completed. Below is a rough guide for accomplishing this. One thing of note is this guide is intended to assist in the…
Join Greg Farro and Ethan Banks from Packet Pushers (http://packetpushers.net/podcast/podcasts/pq-show-93-smart-network-monitoring-paessler-sponsored/) and Greg Ross from Paessler (https://www.paessler.com/prtg) for a discussion about smart network …
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

772 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

16 Experts available now in Live!

Get 1:1 Help Now