Still celebrating National IT Professionals Day with 3 months of free Premium Membership. Use Code ITDAY17

x
?
Solved

clear the IP route

Posted on 2004-10-20
3
Medium Priority
?
772 Views
Last Modified: 2011-09-20
Hi,

I set up Static IP route in the Cisco 2600 router.
(ip route 0.0.0.0 0.0.0.0 192.168.2.2
ip classless)

now, i want to remove this from the router, which command should I use?

thanks.
0
Comment
Question by:robinyanwang
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
3 Comments
 
LVL 7

Accepted Solution

by:
NicBrey earned 400 total points
ID: 12366568
just use "no" in front of the route in global configuration mode

router(config)# no ip route  0.0.0.0 0.0.0.0 192.168.2.2
0
 

Author Comment

by:robinyanwang
ID: 12371804
thank you very much.
0
 
LVL 7

Expert Comment

by:NicBrey
ID: 12374800
Glad to help :)
0

Featured Post

Independent Software Vendors: We Want Your Opinion

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

It happens many times that access list (ACL) have to be applied to outgoing router interface in order to limit some traffic.This article is about how to test ACL from the router which is not very intuitive for everyone. Below scenario shows simple s…
How to set-up an On Demand, IPSec, Site to SIte, VPN from a Draytek Vigor Router to a Cyberoam UTM Appliance. A concise guide to the settings required on both devices
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

722 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question