U had given me this command to configure the PIX 525.
route inside 10.0.0.0 255.0.0.0 10.225.250.x <== the IP address of the 3550 switch
I believe this command is for having a route to the inside network.
The IP address of the the 3550 switch is 192.168.248.254/24 and the inside interface of the PIX is 192.168.248.1/24
I am a bit confused abt this. Can u please clarify this command in accordance with my scenario in the router/switch section.
Also I would like to know how to set telnet password on the PIX