daxa78
asked on
Cisco VPN Client to PIX
Hello, i already have a PIX to PIX solution. Now remote users wants to connect to the pix (506E) too.
We have PIX client 4.0.1 I will be using the following doc provided by Mr lrmoore (the one and only)
http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a008009442e.shtml
This will not in anyway cause the pix to pix to stop working?
No for the question regarding the documetation that i posted here.
It says accesslist 101 here too but i will just put 102 right?
Is there anything is should think about regarding the vpn client to pix solution compared to the pix to pix solution?
This is the link to the doc i used setting up the pix to pix
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a0080094761.shtml
Thank you all
We have PIX client 4.0.1 I will be using the following doc provided by Mr lrmoore (the one and only)
http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a008009442e.shtml
This will not in anyway cause the pix to pix to stop working?
No for the question regarding the documetation that i posted here.
It says accesslist 101 here too but i will just put 102 right?
Is there anything is should think about regarding the vpn client to pix solution compared to the pix to pix solution?
This is the link to the doc i used setting up the pix to pix
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a0080094761.shtml
Thank you all
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.