Pix 501 FTP

I'm logging into a Pix 501 over SSH and I'm configuring this Pix to allow FTP connections from the outside.
Everytime I start and enter the first line of the config it crashes the Pix and I have to have someone pull power.
What is the deal?  Are these not correct?


static (inside,outside) interface 172.28.2.3 netmask 255.255.255.255 0 0


access-list 100 permit tcp any any eq ftp

access-group 100 in interface outside

rick_me27Asked:
Who is Participating?
 
lrmooreConnect With a Mentor Commented:
You want to use this, adding "tcp" and the specific port. What is happening with the way you are trying it is that ALL ports will try to be forwarded to that inside host, including port 22 for your SSH session..

  static (inside,outside) tcp interface ftp 172.28.2.3 ftp netmask 255.255.255.255
  static (inside,outside) tcp interface ftp-data 172.28.2.3 ftp-data netmask 255.255.255.255

access-list 100 permit tcp any any eq ftp
access-list 100 permit tcp any any eq ftp-data

access-group 100 in interface outside
0
 
rick_me27Author Commented:
ahhhh....  thank-you very much.
0
All Courses

From novice to tech pro — start learning today.