s2000_com
asked on
Configuring a DMZ
Helloo all !
I need to configure a DMZ with a Zywall 35.
I have a public IP 212.xxx.xx.xx.
My LAN is now with Private IP in Class A (10.10.1.1 and 255.0.0.0)
I want to put a server (10.10.1.7) in the DMZ but I don't understand how to configure my firewall ?
I need to do a NAT it seems ! Perhaps put this server on an other network like 10.10.2.7 ?
What about the subnet ?
Thanks a lot
Gaël
I need to configure a DMZ with a Zywall 35.
I have a public IP 212.xxx.xx.xx.
My LAN is now with Private IP in Class A (10.10.1.1 and 255.0.0.0)
I want to put a server (10.10.1.7) in the DMZ but I don't understand how to configure my firewall ?
I need to do a NAT it seems ! Perhaps put this server on an other network like 10.10.2.7 ?
What about the subnet ?
Thanks a lot
Gaël
ASKER
Thanks TannerMan !
I have only one public IP.
If I put the webserver and the exchange front-end serveur in the DMZ, how many public IP I need ?
Thanks
I have only one public IP.
If I put the webserver and the exchange front-end serveur in the DMZ, how many public IP I need ?
Thanks
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Setup your DMZ as something like 172.16.1.x or 192.168.1.x utilizing a 255.255.255.0 mask
As far as the config of Zywall, I can't help. Wish you luck with it.