Want to protect your cyber security and still get fast solutions? Ask a secure question today.Go Premium

x
  • Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 658
  • Last Modified:

PIX VPN firewalls in a full mesh configuration

I am attempting to configure 3 PIX 506's in a mesh configuration. I have configured them according to the instructions supplied when another user requested this information. The soultion title was: Cisco PIX multiple VPN tunnel. I have configured my firewalls as the instruction show. The first two firewalls come up, build a tunnel and none of the other tunnels get built. I can ping the out side interfaces of all three firewall from the inside of each network as well as from the inside of each PIX so I know that there is connecivity. What am I doing wrong? Thank you.
0
rvonhorn
Asked:
rvonhorn
  • 2
1 Solution
 
lrmooreCommented:
Is this the document that you used as reference:
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00800a2cce.shtml

What version PIX OS are you using?

If you want to post your configs, I can take a look at them for you..
0
 
lrmooreCommented:
rvonhorn, do you require more information?

0

Featured Post

Evaluating UTMs? Here's what you need to know!

Evaluating a UTM appliance and vendor can prove to be an overwhelming exercise.  How can you make sure that you're getting the security that your organization needs without breaking the bank? Check out our UTM Buyer's Guide for more information on what you should be looking for!

  • 2
Tackle projects and never again get stuck behind a technical roadblock.
Join Now