Want to protect your cyber security and still get fast solutions? Ask a secure question today.Go Premium

x
?
Solved

Cisco Switch - act/lshut

Posted on 2004-11-11
1
Medium Priority
?
4,207 Views
Last Modified: 2008-10-24


I would like to know what the problem is:
I have 4 switches, 4503w/supII+(IOS), a 4003w/SupII(COS), a 4006w/SupII(COS), a 2912XL w OS 12.0(5)XU (IOS)
The 4503 is configured as vtp server and a router which routes Vlan1, Vlan2, and Vlan 10 for switches 4006,4503,4003,and 2912xl
The 3 other switches are configured as vtp clients
All of them have been trunked with encap dot1q

The question is in regards of the 2912XL switch.
When I add a port let us say f0/2 to Vlan 2 and do a sh vlan, I get an act/lshut for Vlan 2 and the port f0/2.
There is a computer attached to the port f0/2 with the correct address scheme.
Also, Vlan 2 is being used on the other switches and works just fine.

Please Help
Thanks...
0
Comment
Question by:Eric Reyes
1 Comment
 
LVL 79

Accepted Solution

by:
lrmoore earned 2000 total points
ID: 12560115
> I get an act/lshut for Vlan 2 and the port f0/2.

act/lshut—VLAN status is active but shut down locally.

Try using the global config mode on the 2924XL:
   no shut vlan 2

0

Featured Post

Technology Partners: We Want Your Opinion!

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

This article is a guide to configure bridging on Cisco Routers.  This is something I never knew was possible until after making a few phone calls to Cisco.  Using bridging saved our company money by not requiring us to purchase a new switch.  Bridgi…
In the world of WAN, QoS is a pretty important topic for most, if not all, networks. Some WAN technologies have QoS mechanisms built in, but others, such as some L2 WAN's, don't have QoS control in the provider cloud.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

580 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question