Network video distribution?

Hey guys,
We want to implement a system for point to multipoint of video content through a Network of two Cisco 2501 and 2503 Routers and one Cisco 1924 en Switch with two clients. We have configured both routers to send message across the network, and both clients can ping the server, Routers, and each other, so i guess the configuration part is done (if not please tell me wot i am missin). Here i copied my running-config to see and check. We tried to use VideoLan sreaming software but we cannot get anything out on our network, is there any nice and easy program that we can download and test to see wether it works or not?
I appricate any help on this,

Here is our Configuration:

Current configuration:
!
version 10.3
service udp-small-servers
service tcp-small-servers
!
hostname LM-2501
!
ip pim rp-address 10.10.1.252
ip multicast-routing
!
interface Ethernet0
 ip address 10.10.1.252 255.0.0.0
 ip access-group 101 in
 ip access-group 101 out
 ip pim sparse-mode
 ip igmp join-group 224.0.1.40
!
interface Serial0
 ip address 20.0.10.2 255.255.255.0
 ip access-group 101 in
 ip access-group 101 out
 ip pim sparse-mode
!
interface Serial1
 no ip address
 shutdown
!
router igrp 1
 network 10.0.0.0
!
ip forward-protocol udp 4000
ip route 0.0.0.0 0.0.0.0 Serial0
ip route 10.11.1.0 255.255.255.0 20.0.10.1
access-list 101 permit icmp any any echo
access-list 101 permit icmp any any echo-reply
pixer77Asked:
Who is Participating?
 
muhalokConnect With a Mentor Commented:
In order to implement a multicast network you need to implement a Multicast server and all computers should register on it.
Then the streamer will send its stream to a multicast IP and all computers registered on the Multicast server will receive it,

Multicast:
http://www.cisco.com/univercd/cc/td/doc/cisintwk/ito_doc/ipmulti.htm

http://www.tldp.org/HOWTO/Multicast-HOWTO.html
0
All Courses

From novice to tech pro — start learning today.