?
Solved

All outbound traffic blocked and reboot upon DHCP renew

Posted on 2004-11-30
10
Medium Priority
?
247 Views
Last Modified: 2010-03-18
Here's the problem:
    Running XP, my system is blocking all outbound & inbound traffic periodically.  Also, periodically when DHCP renews, I get a blue screen indicating a Linksys Wirless services is causing the problem.  Only problem is that I'm not running a Linksys router, and I stopped the service and reboot continues.  I've rolled back twice trying to save my system without reloading.  The problem is fixed, but only comes back later.  Any suggestions would be appreciated.  

Thanks,
filly
0
Comment
Question by:beallp
  • 5
  • 5
10 Comments
 
LVL 41

Expert Comment

by:stevenlewis
ID: 12707320
>>and I stopped the service and reboot continues
did you disable the service
start -->run type
services.msc
also disable the zero wireless config service (if not using wireless)
0
 

Author Comment

by:beallp
ID: 12707507
Still blocking the traffic, when i tried to /release & /renew can't get an IP address from my ISP.  No reboot though.  ???
0
 
LVL 41

Accepted Solution

by:
stevenlewis earned 2000 total points
ID: 12707597
any error messages on /release and /renew?
what firewall are you  running?
0
Industry Leaders: We Want Your Opinion!

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

 

Author Comment

by:beallp
ID: 12709397
nope, just gives a 192.168 ip address. Zone alarm, I was running TPF 6.0 then switched to Zone Alarm Pro when I strarted having all the probs.  I've tried uninstalling Zone Alarm and running no firewall, temp.  All to no avail.
0
 
LVL 41

Expert Comment

by:stevenlewis
ID: 12711386
So is it fixed? If so, what got it?
0
 

Author Comment

by:beallp
ID: 12716113
nope, just wanted to get your attention.  Someone told me that I might have some background service from a previous firewall prog blocking traffic.  Don't know, I tried unistalling my firewall again last night and SP2, nothing worked, if you haven't got anymore suggestions, I think I'm gonna just backup and start over.  
0
 
LVL 41

Expert Comment

by:stevenlewis
ID: 12716278
remove za
uninstall and then check
Manually remove the following left-over log and report files which contain the previous used information of ZA and it affected the next clean reinstallation of ZA:-

C:\Windows\Internet log\ZALog.txt

C:\Windows\System\ZoneLabs\VSMON.RPT

C:\Windows\APPLOG\VSMON.LGC

C:\Windows\APPLOG\MINILOG.LGC

(b) Then Go to registry by Start-run, type regedit. In the registry, drill to

HK_Local Machine\Software\Zone Labs\

Remove the subkeys under above registry including emailsafe and registration.

HK_Current_User\Software\Zone Labs\
0
 

Author Comment

by:beallp
ID: 12718992
Will do, can't try it till tonite, let you know tomorrow.
0
 

Author Comment

by:beallp
ID: 12725942
Yeah, that worked, the DHCP problem was fixed as well.  Thanks alot, really appreciate it.
0
 
LVL 41

Expert Comment

by:stevenlewis
ID: 12725969
Glad to help!
0

Featured Post

Independent Software Vendors: We Want Your Opinion

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Nslookup is a command line driven utility supplied as part of most Windows operating systems that can reveal information related to domain names and the Internet Protocol (IP) addresses associated with them. In simple terms, it is a tool that can …
Trying to figure out group policy inheritance and which settings apply where can be a chore.  Here's a very simple summary I've written which might help.  Keep in mind, this is just a high-level conceptual overview where I try to avoid getting bogge…
Michael from AdRem Software explains how to view the most utilized and worst performing nodes in your network, by accessing the Top Charts view in NetCrunch network monitor (https://www.adremsoft.com/). Top Charts is a view in which you can set seve…
Look below the covers at a subform control , and the form that is inside it. Explore properties and see how easy it is to aggregate, get statistics, and synchronize results for your data. A Microsoft Access subform is used to show relevant calcul…

839 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question