lifetech
asked on
HP Color Laserjet 4500 - Keeps getting Error 49 - Cycle Power.
This printer keeps getting the Cycle Power error message (About once a day). Every time I turn it off and then on again, it works fine. It has 96 MB memory. It is an older printer, and it is used frequently. It seems to happen most when we send multiple print jobs. Any ideas?
There's a couple of things on the HP website you might want to try:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=bpl06646
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=bpl07020
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=bpl06646
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=bpl07020
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
"Communication error--job is corrupted. Power down, remove Jet Direct and cold reset (hold down GO button while powering up). Reinstall Jet Direct (DO NOT reconnect e-net cable), power up and run a self test from the printer'd config menu. If this prints fine, clear the spooler and start to run some tests from the server. If all is well, you will have to enable driver auditing to check which job is wrecking the printer."
Hope this helps fix your problem.