troubleshooting Question

Cisco 837 ADSL configuration for UK provider and multiple static IP's

Avatar of grblades
grbladesFlag for United Kingdom of Great Britain and Northern Ireland asked on
Routers
34 Comments2 Solutions11433 ViewsLast Modified:
I have bought a Cisco 837 ADSL router to replace a noname router which keeps crashing. Here are the configuration details supplied by our ISP :-

Your ADSL login:                xxxxxxxxxxxxx@dslconnect.co.uk
Your ADSL Password:             lxxxxxxx
Virtual Path Identifier:        0
Virtual Channel Identifier:     38
Data Link Encapsulation:        PPPoA (PPP over ATM)
PPP Properties:                 VC Multiplexed or VC Based or VCMUX
Below are details of the static IP addresses allocated to you:
Network:        x.x.40.32
Gateway*:       x.x.40.33
Netmask:        255.255.255.240
* The gateway address will be automatically assigned to your router when
you connect via DHCP.

This is the configuration I have created :-
hostname voiprouter
enable secret 5 xxxxxxxxxxxxxxxxxxxxxxxxxxxx
no aaa new-model
ip subnet-zero
ip routing
ip ips po max-events 100
no ftp-server write-enable
interface Ethernet0
 ip address x.x.40.34 255.255.255.240
 no ip route-cache
 hold-queue 100 out
!
interface ATM0
 no ip address
 no ip route-cache
 no atm ilmi-keepalive
 dsl operating-mode auto
!
interface ATM0.1 point-to-point
 no ip route-cache
 pvc 0/38
  encapsulation aal5mux ppp dialer
  dialer pool-member 1
 !
!
interface FastEthernet1
 no ip address
 duplex auto
 speed auto
!
interface FastEthernet2
 no ip address
 duplex auto
 speed auto
!
interface FastEthernet3
 no ip address
 duplex auto
 speed auto
!
interface FastEthernet4
 no ip address
 duplex auto
 speed auto
!
interface Dialer0
 description $FW_OUTSIDE$
 ip address dhcp
 ip mtu 1452
 encapsulation ppp
 dialer pool 1
 dialer-group 1
 ppp authentication chap pap callin
 ppp chap hostname USERNAME
 ppp chap password 0 PASSWORD
 ppp pap sent-username USERNAME password PASSWORD
!
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer0
no ip http server
no ip http secure-server
!
control-plane
!
scheduler max-task-time 5000
end
ASKER CERTIFIED SOLUTION
Les Moore
Systems Architect
Join our community to see this answer!
Unlock 2 Answers and 34 Comments.
Start Free Trial
Learn from the best

Network and collaborate with thousands of CTOs, CISOs, and IT Pros rooting for you and your success.

Andrew Hancock - VMware vExpert
See if this solution works for you by signing up for a 7 day free trial.
Unlock 2 Answers and 34 Comments.
Try for 7 days

”The time we save is the biggest benefit of E-E to our team. What could take multiple guys 2 hours or more each to find is accessed in around 15 minutes on Experts Exchange.

-Mike Kapnisakis, Warner Bros