Link to home
Start Free TrialLog in
Avatar of jimcrint
jimcrint

asked on

Data error (cyclic redundancy check) errors with backup

Compaq ProLiant 3000, DLT 35/70GB Tape Drive, Veritas Backup Exec 9.1 for SBS.

I have been receiving the following error for the past three nights.

Job Completion Status
Completed status: Failed
Final error: 0x17 - Data error (cyclic redundancy check).
Errors
Backup - C:
Storage device "COMPAQ 1" reported an error on a request to write data to media.
Error reported:
Data error (cyclic redundancy check).

ASKER CERTIFIED SOLUTION
Avatar of theruck
theruck
Flag of Slovakia image

Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial
Avatar of ErnieExpert
ErnieExpert

most often CRC errors are caused by a tape drive that needs cleaning or tapes that are going bad.  
I used to get the same message and I changed the media to a new tape and upgraded the firmware on the tape drive and the message did not appear any more. Also try and clean the tape drive.
Avatar of jimcrint

ASKER

The tape was faulty it has been sent away for repair