Want to protect your cyber security and still get fast solutions? Ask a secure question today.Go Premium

x
?
Solved

css11500 redirect what??

Posted on 2005-03-04
4
Medium Priority
?
247 Views
Last Modified: 2010-08-05
Hey I got a css11503 from cisco

I'd like to know

at the moment www.itchlive.com points to the css
the css redirects the  user to www1.itchlive.com or www2.itchlive.com

I have a problem cause our system cannot handle the www1 and www2, Since we got a system wich shows up certain pages according to the domain name a user typed in.

What I'd like to know
is it possible to have the css handle www.itchlive.com but keep using www.itchlive.com 
So that the user won't see www1 or www2 but only www ??

I understand the css doesn't do NAT or internal routing, is this possible to keep the domain name the same?

And how to do this?
0
Comment
Question by:ro8inmorgan
  • 2
  • 2
4 Comments
 
LVL 32

Accepted Solution

by:
harbor235 earned 750 total points
ID: 13459146
Your CSS should be setup so there is a VIP configured for www.itchlive.com.
Next, you configure the real servers as www1.itchlive.com and www2.itchlive.com.

your config should look something like this:
                                                        vlan1             vlan2
internet------router-----fw(nat_device)-----------CSS---------realservers

real servers are in rfc1918 space(private), FW NATs for the VIP to a public IP which
is www.itchlive.com. This works!

harbor235
0
 

Author Comment

by:ro8inmorgan
ID: 13460168
Ok I understand but what options I have to take to keep the user at the virtual ip??

Cause now my users are redirected to the real ip.

They connect on the virtual ip but are immediatly redirected to the real servers ip.

I want to keep the user connected at the virtual ip How do I do this??

0
 
LVL 32

Expert Comment

by:harbor235
ID: 13461897
you must have set things up incorrectly, your VIP ip should be different than your real ips, in your
case this must not be the case.

harbor235
0
 

Author Comment

by:ro8inmorgan
ID: 13493696
Found the awnser myself, Its quite simple actually configure it normally but I had my services set to redirect instead of local cause I couldn't get local to work. Today I found how to enable the local function, I forgot to set my source groups. Everything work well now :)
0

Featured Post

Get expert help—faster!

Need expert help—fast? Use the Help Bell for personalized assistance getting answers to your important questions.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

New Server 172.16.200.2  was moved from behind Router R2 f0/1 to behind router R1 int f/01 and has now address 172.16.100.2. But we want users still to be able to connected to it by old IP. How to do it ? We can used destination NAT (DNAT).  In DNAT…
Problem Description:   Couple of months ago we upgraded the ADSL line at our branch office from Home to Business line. The purpose of transforming the service to have static public IP’s. We were in need for public IP’s to publish our web resour…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

580 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question