?
Solved

smart serial/v35 dte cable to dce/ethernet

Posted on 2005-03-18
6
Medium Priority
?
1,063 Views
Last Modified: 2008-02-01
dear sir
i have a cisco cable smart serial / v35 dte
i want to convert it to ethernet
can i do this  ?
if no , what can i do to get a connection from cisco 800 series with 2 interfaces ( smart serial / ethernet ) between 2 computers , one is plugged to the router's ethernet , and one is plugged to the smart serial ethernet ,
thanks
0
Comment
Question by:xodos
  • 4
  • 2
6 Comments
 
LVL 11

Expert Comment

by:-Leo-
ID: 13573717
It is not possible with V35 cable as it is syncronous interface and PC have RS232 (asyncronous)
You should use RS232 cable for your router (800 series have both sync/async interface) but it will be pain in the back :)
Better get second router and 2 x V35 cables  (DTE and DCE)

Also, you can use converter V35 to RS232 but Cisco RS232 cable will be cheaper ...
0
 
LVL 11

Expert Comment

by:-Leo-
ID: 13573727
Aaah I see you wish to plug your PC's Ethernet into Cisco's smart serial ?
No way ...
0
 

Author Comment

by:xodos
ID: 13573818
so .
what should i do ,
i have this router , i want to put it on the network and use it ,
how can i use both interfaces ,
i have two cables ,
-smart serial / dte v35
-smart serial / cab SS-x21MT

what is the idea or any hardware i should put between the smart serial and the computer
thanks
0
Evaluating UTMs? Here's what you need to know!

Evaluating a UTM appliance and vendor can prove to be an overwhelming exercise.  How can you make sure that you're getting the security that your organization needs without breaking the bank? Check out our UTM Buyer's Guide for more information on what you should be looking for!

 
LVL 11

Expert Comment

by:-Leo-
ID: 13573835
Smart serial interface is not for the connection to PC!
You can connect it to the modem, multiplexer or another router but not to the PC
Only way to connect Smart Serial interface to PC is to use RS232 cable but as I told it will be headache!
0
 

Author Comment

by:xodos
ID: 13574108
ok ,
now i understand ,
i have another router cisco 1600 series ,
2 ethernet interfaces , 1 aui and one place to install an additional interface
what interface should i buy to connect the router 805 smart serial to the cisco 1600 ?
thanks
0
 
LVL 11

Accepted Solution

by:
-Leo- earned 1500 total points
ID: 13574217
you should buy WIC1-T interface card for your 1600 series router and V.35 DCE cable
Then you have to configure both of your router - thats it.
0

Featured Post

Receive 1:1 tech help

Solve your biggest tech problems alongside global tech experts with 1:1 help.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

What do we know about Legacy Video Conferencing? - Full IT support needed! - Complicated systems at outrageous prices! - Intense training required! Highfive believes we need to embrace a new alternative.
This article shows how to use a free utility called 'Parkdale' to easily test the performance and benchmark any Hard Drive(s) installed in your computer. We also look at RAM Disks and their speed comparisons.
Is your OST file inaccessible, Need to transfer OST file from one computer to another? Want to convert OST file to PST? If the answer to any of the above question is yes, then look no further. With the help of Stellar OST to PST Converter, you can e…
How to fix display issue, screen flickering issue when I plug in power cord to the machine. Before I start explaining the solution lets check out once the issue how it looks like after I connect the power cord. most of you also have faced this…
Suggested Courses
Course of the Month8 days, 14 hours left to enroll

621 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question