Want to protect your cyber security and still get fast solutions? Ask a secure question today.Go Premium

x
?
Solved

Dual LAN

Posted on 2005-03-22
4
Medium Priority
?
345 Views
Last Modified: 2010-04-10
Hi i have a win2k3 server with two Gigabyte lan sockets on the motherboard, is there anyway i can set one to send and one to receive only??

0
Comment
Question by:alumwell
  • 3
4 Comments
 
LVL 97

Accepted Solution

by:
Lee W, MVP earned 1000 total points
ID: 13601782
That doesn't make any sense.  A full duplex connection (which should work with any switch) will send and receive data at the maximum speeds.  In other words, a full duplex connection can SEND data at 1 Gbit at the same time it's RECEIVING data at 1 Gbit, giving you essentially a 2 Gbit throughput.
0
 
LVL 97

Expert Comment

by:Lee W, MVP
ID: 13601787
You might be limited by the system bus, but using a second NIC isn't going to solve that.
0
 

Author Comment

by:alumwell
ID: 13601840
so if i plug both into the network do i have to give both an IP address
0
 
LVL 97

Expert Comment

by:Lee W, MVP
ID: 13601902
Of course.

In the future, please don't grade a question until your satisfied with the answer - and give the expert(s) a chance to get an A grade.
0

Featured Post

Independent Software Vendors: We Want Your Opinion

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

If you’re involved with your company’s wide area network (WAN), you’ve probably heard about SD-WANs. They’re the “boy wonder” of networking, ostensibly allowing companies to replace expensive MPLS lines with low-cost Internet access. But, are they …
This article is in regards to the Cisco QSFP-4SFP10G-CU1M cables, which are designed to uplink/downlink 40GB ports to 10GB SFP ports. I recently experienced this and found very little configuration documentation on how these are supposed to be confi…
In this tutorial you'll learn about bandwidth monitoring with flows and packet sniffing with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're interested in additional methods for monitoring bandwidt…
In this brief tutorial Pawel from AdRem Software explains how you can quickly find out which services are running on your network, or what are the IP addresses of servers responsible for each service. Software used is freeware NetCrunch Tools (https…

580 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question