• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 244
  • Last Modified:

I need a simple program using Bluetooth

Hi,

Does anyone have any sample code they can send direct me towards which will allow me to perform device discover, using C++?  The application needs only to check every 10 seconds for devices in range, and update an Access table with their device IDs.

Any help you could give me woud be much appreciated.


Thanks,
Bob
0
ba272
Asked:
ba272
  • 3
  • 2
1 Solution
 
ba272Author Commented:
I was hoping for a working C++ program, that did at least did device discovery using C++.  I chose that language because I'd read there were more sample programs, versus C#, my preferred language.

Anything you can send I'd appreciate.  The link you'd sent is way too cryptic for me.  I'm a high level programmer and would never be able to build Bluetooth from the ground up.  I need to see working code, so I can strip it down to the device discovery part.

Anything you can do I'd appreciate.

Thanks.
0
 
InteractiveMindCommented:
Fair enough.. Have you checked out that link I posted to you in the C# section? That seems to do what you want... and, it's in C# :)
0
 
InteractiveMindCommented:
Ah, nevermind; I just read your response in the C# thread.
0
 
ba272Author Commented:
Thanks for the help.

BTW: The hardware company which sells me the BT badges just gave me the C++ source code to their device discovery program, so all is good.

Thanks.
0

Featured Post

Free Tool: Site Down Detector

Helpful to verify reports of your own downtime, or to double check a downed website you are trying to access.

One of a set of tools we are providing to everyone as a way of saying thank you for being a part of the community.

  • 3
  • 2
Tackle projects and never again get stuck behind a technical roadblock.
Join Now