3com Superstack 3250 - VLan creation

Posted on 2005-04-07
Last Modified: 2012-08-14

    I have been batting this for a few days now.   I have Vlan 1 - which is 10.10.10.x and vlan 2 which is 10.52.50.x.. now with these two vlan's they shared as a gateway.   Now how do I go about in a Superstack 3250 to create an ip route to the gateway,   I can ping both ethernet interfaces and I have internet access from Vlan1.  I cannot get Vlan 2, to goto the gateway.

Any ideas?
Question by:Eagleeye55
    LVL 8

    Expert Comment

    Telnet to your switch.

    Go to:

    Protocol>IP>Route>Add and then follow the simple steps.  If you do a route summary it should look like this.

    Default Route   --              --     Indirect Static     --   1      10.10.10.x      Direct   Local      1   1      10.52.50.x      Direct   Local      2

    The two IPx ending in X should be IPs assigned to your SS3250

    If this doesn't do the trick, and you past a route summary, and also provide the IP addresses you assigned to your switch for each VLAN?


    Author Comment

    Select menu option (protocol/ip/route): add
    Enter IP address:
    Enter subnet mask:
    Enter gateway IP address:
    Enter route metric (1-16)[1]: 1

    Fail to add the specified route.

    Select menu option (protocol/ip/route):

    any ideas??  here is the current summary, which the switch created on its own.  It will not let me remove either entry to add the new entries in????

    Destination     Subnet Mask      Metric    Gateway          Status
    Default Route   --               --       static      1         --               local    1         --               local

    Select menu option (protocol/ip/route):
    LVL 8

    Accepted Solution

    Is a router?

    Can you past the route statements from that as well?


    Author Comment

    Actually I ended up finding that a every port on the router must be part of one untagged Vlan... After I created another VLAN, leaving it all untagged, I could create my routes and such.

    I will give ITDharam, the points, because he helped get me on the right track.

    Write Comment

    Please enter a first name

    Please enter a last name

    We will never share this with anyone.

    Featured Post

    NetScaler Deployment Guides and Resources

    Citrix NetScaler is certified to support many of the most commonly deployed enterprise applications. Deployment guides provide in-depth recommendations on configuring NetScaler to meet specific application requirements.

    This is an article about my experiences with remote access to my clients (so that I may serve them) and eventually to my home office system via Radmin Remote Control. I have been using remote access for over 10 years and have been improving my metho…
    ADCs have gained traction within the last decade, largely due to increased demand for legacy load balancing appliances to handle more advanced application delivery requirements and improve application performance.
    Here's a very brief overview of the methods PRTG Network Monitor ( offers for monitoring bandwidth, to help you decide which methods you´d like to investigate in more detail.  The methods are covered in more detail in o…
    This video gives you a great overview about bandwidth monitoring with SNMP and WMI with our network monitoring solution PRTG Network Monitor ( If you're looking for how to monitor bandwidth using netflow or packet s…

    761 members asked questions and received personalized solutions in the past 7 days.

    Join the community of 500,000 technology professionals and ask your questions.

    Join & Ask a Question

    Need Help in Real-Time?

    Connect with top rated Experts

    7 Experts available now in Live!

    Get 1:1 Help Now