[Okta Webinar] Learn how to a build a cloud-first strategyRegister Now

x
?
Solved

Help setting up a Netgear FVS318 Router behind a fwBuilder firewall on a RedHat Linux box.

Posted on 2005-04-13
3
Medium Priority
?
645 Views
Last Modified: 2008-01-09
I need to set up a Netgear Router behind a firewall. The reason for this is VPN access for clients.
How do I set up the WAN side of the Netgear to get through the LAN side of the firewall on the Linux
box. I would appreciate any help I could get. Thanks.
0
Comment
Question by:rfgraham
1 Comment
 
LVL 4

Accepted Solution

by:
AZweb earned 500 total points
ID: 13779272
I'm not sure why you are trying to do this and if it will even work.
The FVS318 is a router/firewall so why would you put it behind another firewall, I believe this will not allow the VPN functions to pass communications through.
0

Featured Post

VIDEO: THE CONCERTO CLOUD FOR HEALTHCARE

Modern healthcare requires a modern cloud. View this brief video to understand how the Concerto Cloud for Healthcare can help your organization.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

While it is possible to put two routes in place with the secondary having a higher metric, this may not always work. In the event of a failure that does not bring down the physical interface on the router the primary route is not removed. There is a…
How to set-up an On Demand, IPSec, Site to SIte, VPN from a Draytek Vigor Router to a Cyberoam UTM Appliance. A concise guide to the settings required on both devices
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

834 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question