[Last Call] Learn how to a build a cloud-first strategyRegister Now

x
?
Solved

Draytek Vigor 2600 VPN question

Posted on 2005-04-18
3
Medium Priority
?
1,266 Views
Last Modified: 2008-02-01
I've just bought a Draytek Vigor 2600 since my old ADSL modem died. I'm very pleased about the user interface to setup the router, but i can't seem to get VPN running!

Can anyone guide me through a few simple steps to setup my VPN in my modem

thnx in advance
0
Comment
Question by:Mr-sark
  • 2
3 Comments
 
LVL 19

Accepted Solution

by:
Barthax earned 1500 total points
ID: 13804666
Draytek have some good pages on the Vigors themselves over at http://www.support.draytek.co.uk/.
0
 
LVL 1

Author Comment

by:Mr-sark
ID: 13804706
How is it i can't find these pages @ draytek.nl and dryteck.com ... :(
I do  have to map a port right ?
0
 
LVL 19

Expert Comment

by:Barthax
ID: 13804819
I'm not aware of any circumstances where you have to map a port, no, as the Draytek itself is handling the VPN.  Could you clarify your understanding of why you would need this mapping - perhaps I'm misunderstanding you intention.
0

Featured Post

New Tabletop Appliances Blow Competitors Away!

WatchGuard’s new T15, T35 and T55 tabletop UTMs provide the highest-performing security inspection in their class, allowing users at small offices, home offices and distributed enterprises to experience blazing-fast Internet speeds without sacrificing enterprise-grade security.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

One of the Top 10  common Cisco VPN problems are not-matching shared keys. This is an easy one to fix, but not always easy to notice, see the case below. A simple IPsec tunnel between fast Ethernet interfaces of routers SW1 (f1/1) and R1(f0/0). …
Sometimes, you want your microsoft VPN to route all the traffic to the remote network. Usually your employer network. This makes it possible to access all the nodes inside this remote LAN, even if they have no "public DNS" entries. To do so, you wo…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Windows 10 is mostly good. However the one thing that annoys me is how many clicks you have to do to dial a VPN connection. You have to go to settings from the start menu, (2 clicks), Network and Internet (1 click), Click VPN (another click) then fi…
Suggested Courses

829 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question