Remote desktop web connection through a pix 515  !HELP!

Posted on 2005-04-20
Last Modified: 2010-04-08
I have a pix 515. I need to implement remote desktop web connection ASAP. I can't get it to go through the firewall. I can connect to my tsweb connection and get the web login but when I type in a server name like "termserv" I get a cannot connect to remote server.

I have a few questions?

I used this line:
access-list intOutside_in permit tcp any host (ip address) eq 3389

I used this after i typed config t

when I type show run i see it there.

I also used  
static (inside,outside) tcp 3389 3389 netmask 0 0

i also did this sfter config t
I have 443 fowarded through and it works and 25 forwarded through and that works as well but i can't get this too work. It is driving me crazy.
Question by:uyht
    1 Comment
    LVL 6

    Accepted Solution

    Try this:

    Delete your access-list intOutside_in permit tcp any host (ip address) eq 3389
    and replace with the following:

    Did you also apply the access list?

    access-list intOutside_in permit tcp any host eq 3389
    access-group intOuside_in in interface outside
    static (inside,outside) tcp 3389 3389 netmask 0 0

    After you apply the access lists you can always type: "sh access-list" to see if the access list is being accessed.
    Also turn on debug logging though the console and check for access denies.

    Let me know if you need anything else.

    Write Comment

    Please enter a first name

    Please enter a last name

    We will never share this with anyone.

    Featured Post

    Enabling OSINT in Activity Based Intelligence

    Activity based intelligence (ABI) requires access to all available sources of data. Recorded Future allows analysts to observe structured data on the open, deep, and dark web.

    Suggested Solutions

    Title # Comments Views Activity
    Nexus qos question 2 51
    Cisco 2960 Vlan create. 3 38
    Cisco VOIP 7941 6 57
    Cisco 4500 - Supervisor cards and licensing 2 16
    When I upgraded my ASA 8.2 to 8.3, I realized that my nonat statement was failing!   The log showed the following error:     %ASA-5-305013: Asymmetric NAT rules matched for forward and reverse flows It was caused by the config upgrade, because t…
    From Cisco ASA version 8.3, the Network Address Translation (NAT) configuration has been completely redesigned and it may be helpful to have the syntax configuration for both at a glance. You may as well want to read official Cisco published AS…
    It is a freely distributed piece of software for such tasks as photo retouching, image composition and image authoring. It works on many operating systems, in many languages.
    This video discusses moving either the default database or any database to a new volume.

    779 members asked questions and received personalized solutions in the past 7 days.

    Join the community of 500,000 technology professionals and ask your questions.

    Join & Ask a Question

    Need Help in Real-Time?

    Connect with top rated Experts

    11 Experts available now in Live!

    Get 1:1 Help Now