?
Solved

VPN with a SonicWALL running in transparent mode?

Posted on 2005-04-23
1
Medium Priority
?
1,688 Views
Last Modified: 2008-01-09
I have a SonicWALL 2040 running in transparent mode (bridging) with my internet router (cisco 1760) performing nat.  How can I setup vpn tunnels with it in this configuration?  The documentation on SonicWALL's site is very general.  I only found a document that describes terminating the vpn at the DMZ, but I'm not using the DMZ.  Any ideas?

Thanks,
Tom
0
Comment
Question by:tommoran
1 Comment
 
LVL 6

Accepted Solution

by:
magicomminc earned 2000 total points
ID: 13864496
not very familiar with SonicWall 2040, I guess it depends on where is your Internet public IP address, if it's on cisco 1760, then you can make the Cisco 1760 as VPN termination point. are you setting up a VPN site to site connectoin or remote access?
0

Featured Post

What does it mean to be "Always On"?

Is your cloud always on? With an Always On cloud you won't have to worry about downtime for maintenance or software application code updates, ensuring that your bottom line isn't affected.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Sometimes, you want your microsoft VPN to route all the traffic to the remote network. Usually your employer network. This makes it possible to access all the nodes inside this remote LAN, even if they have no "public DNS" entries. To do so, you wo…
Juniper VPN devices are a popular alternative to using Cisco products. Last year I needed to set up an international site-to-site VPN over the Internet, but the client had high security requirements -- FIPS 140. What and Why of FIPS 140 Federa…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Windows 10 is mostly good. However the one thing that annoys me is how many clicks you have to do to dial a VPN connection. You have to go to settings from the start menu, (2 clicks), Network and Internet (1 click), Click VPN (another click) then fi…

864 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question