• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 238
  • Last Modified:

NAT Virutally

New to NAT. I have a Cisco 1711 and I want to NAT a LAN IP (192.168.1.x) to a class a 10.0.1.x before sending through an IP Sec tunnel. I am told that a virutal NAT is the best way to go (it is supposed to be faster). Anyone know where I can get up to speed on this topic? I am looking advice or a doc that addresses this specifically.
0
heavenlydishes
Asked:
heavenlydishes
1 Solution
 
Gen2003Commented:
You can create virtual Loopback interface and make it NAT outside having address 10.0.1.x. BTW what is the reason to change one private net to another one?

Some good links for NAT:
http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080094e77.shtml
http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a0080094634.shtml

Regards.
0
 
heavenlydishesAuthor Commented:
Lots of different networks connecting to ours and natting to avoid IP conflicts.
0

Featured Post

Get your Conversational Ransomware Defense e‑book

This e-book gives you an insight into the ransomware threat and reviews the fundamentals of top-notch ransomware preparedness and recovery. To help you protect yourself and your organization. The initial infection may be inevitable, so the best protection is to be fully prepared.

Tackle projects and never again get stuck behind a technical roadblock.
Join Now