[Last Call] Learn how to a build a cloud-first strategyRegister Now

x
?
Solved

error -2147467259 (0x80004005)

Posted on 2005-04-28
45
Medium Priority
?
2,470 Views
Last Modified: 2012-08-14
-2147467259 (0x80004005)
I have heard that I can run IIS directly through the wwwroot folder. Even though I could not run it. All the settings are correct.
When I try to run it it gives me above error.
What I did is that I searched for this error online. I found following links :http://support.microsoft.com/kb/q272693/#kb3
The links suggest to download and installed two things :
1) http://support.seagatesoftware.com/communityCS/FilesAndUpdates/scr8_webregfix.exe
2) NOTE: The P2sodbc.dll issue also applies when version 8.0.0.84 is distributed to computers that do not have Crystal Reports installed (for example, as part of an application previewing a Crystal Report). For more information, see the following Crystal Decisions Knowledge Base article:
http://support.crystaldecisions.net/library/kbase/articles/c2007612.asp

Also it keep on saying that I have installed the Crystal report. Really, I did not installed it. I do not know what is even CR.
Any expert have any opinion?
Regards,
0
Comment
Question by:pinaldave
  • 18
  • 13
  • 8
  • +2
45 Comments
 
LVL 11

Assisted Solution

by:ajaikumarr
ajaikumarr earned 400 total points
ID: 13892312
Hai,

Check this link... Given all the possiblities for this error

http://www.aspfaq.com/show.asp?id=2413

Bye
Ajai
0
 
LVL 11

Expert Comment

by:ajaikumarr
ID: 13892323
Hai,

Try this too.
Goto IIS, Select Properties for Virtual Directory and set the application protection to Low.

Bye
Ajai
0
 
LVL 21

Author Comment

by:pinaldave
ID: 13892358
Thanks for reply...
where is virtual directory?
I am sorry but those errors pages does not explain me much.
Regards,
0
Industry Leaders: We Want Your Opinion!

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

 
LVL 21

Author Comment

by:pinaldave
ID: 13892359
any other suggestion...please?
0
 
LVL 8

Assisted Solution

by:anthonywjones66
anthonywjones66 earned 400 total points
ID: 13892614
I think you need to show us some code of one of the pages that gives you this error.  If this is a 500.100 ASP error you should be able to see exactly which line of the ASP page is failing.

I suspect the page is trying to open a MS Jet MDB file but that the IUSR_<machinename> account under which ASP will normally run does not have Read write permissions to the file.


Anthony.
0
 
LVL 11

Expert Comment

by:ajaikumarr
ID: 13892819
Hai,

1. Start -> Settings -> Control Panel -> Administrative Tools -> Internet Services Manager
2. This will launch you IIS window select your system Name on left frame.
3. Navigate to "Default Web Site" and select your site name if you have created virtual directoy or just select "Default Web Site"
4. Right Click -> Properties, select "Home Directory" tab.
5. You can see a text called "Application Protection" set the value to "Low (IIS Process)"

Bye
Ajai
0
 
LVL 8

Expert Comment

by:anthonywjones66
ID: 13892852
Ajai,

How does that fix anything?

It might getting it working but is it really fixing the problem or just avoiding it?

If you had a choice would you run an asp application with low application protection?

Anthony.
0
 
LVL 13

Expert Comment

by:davidlars99
ID: 13894691
is this error for just one particular page or for all asp pages..?
0
 
LVL 21

Author Comment

by:pinaldave
ID: 13894761
All the pages are not working also my asp page is just a hello world . I also tried with some html in the asp page and also tried with empty page. It is just not starting...
0
 
LVL 21

Author Comment

by:pinaldave
ID: 13894779
when I lowered my protection to low the error is

"The requested resource is in use."
0
 
LVL 8

Expert Comment

by:anthonywjones66
ID: 13894838
Can you show us the complete 'Hello World' page and the full phyical path of the file?

0
 
LVL 13

Assisted Solution

by:davidlars99
davidlars99 earned 800 total points
ID: 13895142
maybe windows registry screwed up, try to re-install IIS
0
 
LVL 13

Expert Comment

by:davidlars99
ID: 13895153
pinaldave, what do you mean by --> I have heard that I can run IIS directly through the wwwroot folder

???
0
 
LVL 21

Author Comment

by:pinaldave
ID: 13895670
>>> I have heard that I can run IIS directly through the wwwroot folder<<< that is bad english... please ignore.

I came to work now...so I will be able to access my home computer when I reach home... thank you for participating in my thread and guide me.
I will post the hello world and logical path when I go home.
Regards,
---Pinal
0
 
LVL 2

Assisted Solution

by:Odyssey122
Odyssey122 earned 400 total points
ID: 13898229
Reinstall IIS from the WINDOWS CD..

Leave everything default...

Then try again..

Ody
0
 
LVL 21

Author Comment

by:pinaldave
ID: 13899532
Reinstalled IIS no differance...
Also the code which I am trying to access is :
<html>
<body bgcolor="yellow">
<center>
<h2>Hello W3Schools!</h2>
</center>
</body>
</html>

This is simple html code with asp extention.
Any other ideas guys...?
0
 
LVL 13

Expert Comment

by:davidlars99
ID: 13899538
do you have any other web servers installed too..?
0
 
LVL 21

Author Comment

by:pinaldave
ID: 13899545
like what...? I have installed coldfusion. << that brings the money so I can learn ASP.
0
 
LVL 21

Author Comment

by:pinaldave
ID: 13899554
I can not reinstall now Windows for this... :(
0
 
LVL 11

Expert Comment

by:ajaikumarr
ID: 13899557
Hai

Stop ColdFusion and Restart IIS and then try to browse that page...

Bye
Ajai
0
 
LVL 21

Author Comment

by:pinaldave
ID: 13899570
done... not working...
I will try to uninstall coldfusion...now...
0
 
LVL 13

Expert Comment

by:davidlars99
ID: 13899578
I was just searching " -2147467259 (0x80004005)" for any info and I was surprised that it has no definitive meaning... it is very random and ugly!
0
 
LVL 11

Expert Comment

by:ajaikumarr
ID: 13899581
Ok...

Bye
Ajai
0
 
LVL 13

Expert Comment

by:davidlars99
ID: 13899583
maybe better off to stop ColdFusion > restart computer > re-install IIS > restart computer > try again..?
0
 
LVL 21

Author Comment

by:pinaldave
ID: 13899588
szAppName : dllhost.exe     szAppVer : 5.1.2600.2180     szModName : ole32.dll
szModVer : 5.1.2600.2595     offset : 00025ac8    

I got this error while I was uninstalling ColdFusion is it related to ASP too.. cause I have seen it before when I was playing with IIS.
Thank you for continuous guidance.
0
 
LVL 13

Expert Comment

by:davidlars99
ID: 13899592
sorry I mean

 maybe better off to uninstall ColdFusion > restart computer > re-install IIS > restart computer > try again..?
0
 
LVL 21

Author Comment

by:pinaldave
ID: 13899600
I am just uninstalling CF at this moment... I will restart my comp right after that... and see what happens....
0
 
LVL 13

Accepted Solution

by:
davidlars99 earned 800 total points
ID: 13899604
0
 
LVL 11

Expert Comment

by:ajaikumarr
ID: 13899607
Hai,

Seems everything is screwed up in your system.... Ok...

First uninstall IIS and restart your system then try to uninstall coldfussion.

Bye
Ajai
0
 
LVL 13

Expert Comment

by:davidlars99
ID: 13899611
I'll be back in about 40 minutes and find ot the results
0
 
LVL 11

Expert Comment

by:ajaikumarr
ID: 13899612
Ok....

Then remove IIS and Restart then Add IIS and try asp pages...

Make sure to Un-Check "Show Friendly HTTP Error messages" on Internet Explorer options. (Tools -> Internet Options -> Advanced Tab)

Bye
Ajai
0
 
LVL 21

Author Comment

by:pinaldave
ID: 13899638
Removed Coldfusion does not matter. I will try to remove IIS than... again...
0
 
LVL 2

Expert Comment

by:Odyssey122
ID: 13900033
Going to go with a hunch here, when you read up about your errors in the begining, you said it was something to do with crystal reports 8.  So why not try to uninstall it if that may be the issue.  Why we messing with cold fusion?  Eh' if it doesn't work, atleast we tried it..



How can I be certain CE is completely uninstalled?
Solution
How you can remove all Crystal Decisions products. In that case, use Add/Remove Programs from the Control Panel to remove all Crystal Decisions products (Crystal Reports, Crystal Enterprise, Seagate Info, Seagate Analysis, etc.).

===========
WARNING: Before uninstalling CE, make certain that any files you wish to retain have been backed up or moved to a new directory location. This is especially important if the computer stores Crystal Reports files as this method will remove all Crystal Decisions products.
===========

After using Add/Remove Programs to remove CE, complete the following steps to completely uninstall CE:

1. Open Windows Explorer and expand the %systemroot% directory. For Windows NT 4\2000 this is generally the Winnt folder.

2. Delete the \Crystal subdirectory and its contents.

3. Expand the \System32 subdirectory on Windows NT 4\2000. Delete the following files if they are present:

Crbas*.*
Crdb*.*
Crgup*.*
Crheapalloc.dll
Criadx*.*
Crinf*.*
Cror*.*
Crpaig80.dll
crpe*.*
Crsyb*.*
crutl*.*
Crxml*.*
Ebus-3*.*
Etc-1-*.*
Exlate32.dll
Htmlr*.DLL
nsclient.dll
OMNI*.DLL
p2bdao.dll
p2ctdao.dll
p2irdao.dll
p2sevt.dll
p2sodbc.dll
p3ddoen.dll
p3rdoen.dll
p3seven.dll
p3soden.dll
p3tdoen.dll
r3exlen.dll
STRINGres_en.DLL

4. Expand the Program Files folder and delete the Seagate Software subdirectory and its contents. If you installed to a different directory, remove that directory as well. (By default, some files will always be installed to the Program Files\Seagate Software directory.) If you are using Crystal Enterprise 8.5 you will also need to remove the Program Files\Crystal Decisions directory.

5. For Crystal Enterprise 8.0 you will need to delete the Seagate Software registry keys using the Windows Registry Editor as follows:

a. Click Start > Run, type "Regedit" and click 'OK'.

b. Expand HKEY_LOCAL_MACHINE\SOFTWARE. Delete the Seagate Software subkey.

c. Expand HKEY_CURRENT_USER\SOFTWARE. Delete the Seagate Software subkey.

d. Close the Registry Editor.

Crystal Enterprise is now completely uninstalled.



Let me know..

Ody
0
 
LVL 21

Author Comment

by:pinaldave
ID: 13900655
thank you Ody but I do not have crystal report... installed. I never installed it as I do not know what that is.
Also I removed coldfusion. I removed IIS.. restart computer. Installed the IIS again no luck...
Removed IIS I installed the service pack 2 again and restart and installed IIS same error...
Also I have checked to make sure if Crystal report is removed and I could not find a single file so I am sure that is not there...

Any other ideas guys....? If you guys think that the option is re-installing Windows ... well I guess that is the option left..
---Pinal
0
 
LVL 13

Expert Comment

by:davidlars99
ID: 13900682
before you re-install windows try to install MDAC and see what happens

http://www.microsoft.com/downloads/details.aspx?FamilyID=6c050fe3-c795-4b7d-b037-185d0506396c&DisplayLang=en
0
 
LVL 11

Expert Comment

by:ajaikumarr
ID: 13900684
Hai,

As I said earlier... Your entire system is screwed up... So there is no other way than to repair/reinstall Windows.

Bye
Ajai
0
 
LVL 13

Expert Comment

by:davidlars99
ID: 13900698
there you go..!  :)
0
 
LVL 21

Author Comment

by:pinaldave
ID: 13901013
thank you, I will try it today evening. I had to go to office for something urgent.
Regards,
---Pinal
0
 
LVL 21

Author Comment

by:pinaldave
ID: 13902641
installed MDAC also.. did not worked ...
I guess thank you guys for help... I will have to reinstalled the windows... I guess.
Regards,
---Pinal
0
 
LVL 2

Expert Comment

by:Odyssey122
ID: 13902668
Well I don't want any points out of this, but I think there needs to be a split of points some how now...

However you feel right in choosing of course...

Just not me...

Ody
0
 
LVL 21

Author Comment

by:pinaldave
ID: 13902712
Question is not answered. It may be possible there is no answer.
Thanks all for your help. Your help is appriciapted.
Regards,
---Pinal
0
 
LVL 13

Expert Comment

by:davidlars99
ID: 13910414
let us know if you'll ever get CF and ASP work together
0
 
LVL 21

Author Comment

by:pinaldave
ID: 13910426
I got ASP working y'day....
yeah... I fdisk and format my hard drive and installed my operating system again. IIS responded to ASP.
Now today I will install the CF. I will let you know.
Windows is weird!
---Pinal
0
 
LVL 13

Expert Comment

by:davidlars99
ID: 13910456
depends which version, I love 2003 and 2000 advanced server
0
 
LVL 21

Author Comment

by:pinaldave
ID: 13910486
It is my home computer buddy... server might me nice... but ... windows xp pro ...:(
any way windows may be mad... but I still like it...
0

Featured Post

Free Tool: IP Lookup

Get more info about an IP address or domain name, such as organization, abuse contacts and geolocation.

One of a set of tools we are providing to everyone as a way of saying thank you for being a part of the community.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Hello, all! I just recently started using Microsoft's IIS 7.5 within Windows 7, as I just downloaded and installed the 90 day trial of Windows 7. (Got to love Microsoft for allowing 90 days) The main reason for downloading and testing Windows 7 is t…
I was asked about the differences between classic ASP and ASP.NET, so let me put them down here, for reference: Let's make the introductions... Classic ASP was launched by Microsoft in 1998 and dynamically generate web pages upon user interact…
Integration Management Part 2
Exchange organizations may use the Journaling Agent of the Transport Service to archive messages going through Exchange. However, if the Transport Service is integrated with some email content management application (such as an anti-spam), the admin…

830 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question