hitechauto
asked on
PIX 501
Hi There
When i reboot my pix i get the following message and my mail seems to have stopped flowing through... Any ideas?
16MB RAM
mcwa i82559 Ethernet at irq 9 MAC: 0011.5cd3.7263
mcwa i82559 Ethernet at irq 10 MAC: 0011.5cd3.7264
Flash=E28F640J3 @ 0x3000000
BIOS Flash=E28F640J3 @ 0xD8000
lobal 196.34.84.3 will be Port Address Translated
.
Cryptochecksum(unchanged): 998ccc6f ec6723de 08f5159f c929fb67
Type help or '?' for a list of available commands.
Hi-Tech> ?
When i reboot my pix i get the following message and my mail seems to have stopped flowing through... Any ideas?
16MB RAM
mcwa i82559 Ethernet at irq 9 MAC: 0011.5cd3.7263
mcwa i82559 Ethernet at irq 10 MAC: 0011.5cd3.7264
Flash=E28F640J3 @ 0x3000000
BIOS Flash=E28F640J3 @ 0xD8000
lobal 196.34.84.3 will be Port Address Translated
.
Cryptochecksum(unchanged):
Type help or '?' for a list of available commands.
Hi-Tech> ?
ASKER
I HAVE NOT MADE ANY CHANGES TO THE FIREWALL NOR MY SERVERS. IT ALL JUST STOPPED WORKING....!
Use BREAK or ESC to interrupt flash boot.
Use SPACE to begin flash boot immediately.
Reading 1937920 bytes of image from flash.
########################## ########## ########## ########## ########## ########## ####
#########################
16MB RAM
imgsum_config: sumval(0x5bdd) md5(0x8220061c 0x7e5e202e 0xbdfa944d 0x875409cc)
imgsum_verify: chksum(0x 0) md5(0x13f5cc67 0x5929048b 0x2b8d277a 0x563b99ac)
Panic: kernel - The checksum verification for this image failed.
=========
Use BREAK or ESC to interrupt flash boot.
Use SPACE to begin flash boot immediately.
Reading 1937920 bytes of image from flash.
##########################
#########################
16MB RAM
imgsum_config: sumval(0x5bdd) md5(0x8220061c 0x7e5e202e 0xbdfa944d 0x875409cc)
imgsum_verify: chksum(0x 0) md5(0x13f5cc67 0x5929048b 0x2b8d277a 0x563b99ac)
Panic: kernel - The checksum verification for this image failed.
=========
Looks like something is corrupt.. have you called Cisco TAC?
ASKER
nope, i am not familiar with them or pix at all....
please explain, what can i do??
please explain, what can i do??
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
This is expected if you have anything like this in your config:
global (outside) 1 196.34.84.3
What kind of mail server do you have? Exchange? Did you disable fixup?
no fixup protocol smtp 25
When did the mail flow stop working? What changed before it stopped working?