?
Solved

PIX 501 PDM

Posted on 2005-05-11
2
Medium Priority
?
527 Views
Last Modified: 2010-04-09
I got a PIX 501 with 10 user license.  I enabled ethernet1 and inserted an IP address of 192.168.1.1 255.255.255.0.  Then I gave my laptop a static IP address of 192.168.1.2 255.255.255.0.  The default gateway for my laptop I inserted 192.168.1.1 255.255.255.0.  I can ping and telnet to my little firewall but I have no clue launching the PDM:

https://192.168.1.1/

Am I missing a configuraiton?  My goal is to become an expert in the command line of PIX but would like to give a brief demonstration to my fellow collegues through the PDM.
0
Comment
Question by:Pentrix2
2 Comments
 
LVL 6

Accepted Solution

by:
campbelc earned 2000 total points
ID: 13977065
Yes the https://192.168.1.1/pdm.html is the actual url.

A few things to look at then in your config would be:

Make sure you have the following:

http server enable
http 192.168.1.0 255.255.255.0 inside

Also do a "show int" from your console and double check all the interface info:

interface ethernet0 "outside" is up, line protocol is up
  Hardware is i82559 ethernet, address is 0013.8042.fb31
  IP address 67.x.x.x, subnet mask 255.255.255.0
  MTU 1500 bytes, BW 100000 Kbit full duplex
        1888230 packets input, 1338594642 bytes, 0 no buffer
        Received 8 broadcasts, 0 runts, 0 giants
        0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
        2292412 packets output, 329368349 bytes, 0 underruns
        0 output errors, 0 collisions, 0 interface resets
        0 babbles, 0 late collisions, 0 deferred
        0 lost carrier, 0 no carrier
        input queue (curr/max blocks): hardware (128/128) software (0/3)
        output queue (curr/max blocks): hardware (0/28) software (0/1)
interface ethernet1 "inside" is up, line protocol is up
  Hardware is i82559 ethernet, address is 0013.8042.fb32
  IP address 192.168.1.1, subnet mask 255.255.255.0
  MTU 1500 bytes, BW 100000 Kbit full duplex
        2313852 packets input, 331124626 bytes, 0 no buffer
        Received 21358 broadcasts, 0 runts, 0 giants
        0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
        1843088 packets output, 1326045483 bytes, 0 underruns
        0 output errors, 0 collisions, 0 interface resets
        0 babbles, 0 late collisions, 0 deferred
        0 lost carrier, 0 no carrier
        input queue (curr/max blocks): hardware (128/128) software (0/28)
        output queue (curr/max blocks): hardware (0/18) software (0/1)
0
 
LVL 9

Author Comment

by:Pentrix2
ID: 13977127
Thank you very much Campbelc.  I was missing the http server enable, and http 192.168.1.0 255.255.255.0 inside.  Now I can give a brief demontration.  :)
0

Featured Post

Prepare for your VMware VCP6-DCV exam.

Josh Coen and Jason Langer have prepared the latest edition of VCP study guide. Both authors have been working in the IT field for more than a decade, and both hold VMware certifications. This 163-page guide covers all 10 of the exam blueprint sections.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

This article explains the fundamentals of industrial networking which ultimately is the backbone network which is providing communications for process devices like robots and other not so interesting stuff.
In this article, the configuration steps in Zabbix to monitor devices via SNMP will be discussed with some real examples on Cisco Router/Switch, Catalyst Switch, NAS Synology device.
Both in life and business – not all partnerships are created equal. As the demand for cloud services increases, so do the number of self-proclaimed cloud partners. Asking the right questions up front in the partnership, will enable both parties …
As a trusted technology advisor to your customers you are likely getting the daily question of, ‘should I put this in the cloud?’ As customer demands for cloud services increases, companies will see a shift from traditional buying patterns to new…
Suggested Courses
Course of the Month16 days, 19 hours left to enroll

864 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question