Want to protect your cyber security and still get fast solutions? Ask a secure question today.Go Premium

x
?
Solved

Split-tunneling with Cisco Client for Windows

Posted on 2005-05-12
1
Medium Priority
?
182 Views
Last Modified: 2010-04-12
My web access is blocked when using Cisco VPN Client.  Is there anything that I can do about that?  Like to send all of my port 80 requests through the normal connection instead of the VPN.  How would I go about this?

Thanks
0
Comment
Question by:fbk2000
1 Comment
 
LVL 79

Accepted Solution

by:
lrmoore earned 500 total points
ID: 13990150
Short answer - no. Not on the client end.
Long answer - it is up to the network administrator at your office to allow/not allow it. This is one feature that makes the Cisco VPN client so attractive to companies that want to provide secure access to their users.
Do you know what you connect to? A PIX FW, or VPN 3000, or router? Do you control that endpoint? If yes, then we can help. If not, then you must discuss it when whomever does control it.

0

Featured Post

Independent Software Vendors: We Want Your Opinion

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

How to set-up an On Demand, IPSec, Site to SIte, VPN from a Draytek Vigor Router to a Cyberoam UTM Appliance. A concise guide to the settings required on both devices
If you’re involved with your company’s wide area network (WAN), you’ve probably heard about SD-WANs. They’re the “boy wonder” of networking, ostensibly allowing companies to replace expensive MPLS lines with low-cost Internet access. But, are they …
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Suggested Courses

572 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question