• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 327
  • Last Modified:

Windows 2000 Gateway Server

Hello,

Here is the scenario:

We have several Windows 2000/ 2003 servers and Linux servers all are connected my switch and switch is connected to our outside line.

What we are trying to do is put a windows 2000 server in front of the switch so that all incoming packet are filter by the firewall software and then out the second nic card to the switch.
Each server has static ip addresses.  

We are unsure how to setup the server and welcome tips.
our ip addresses start with 66.241.64.2 end woth 66.241.64.255
0
ComputerTechie
Asked:
ComputerTechie
2 Solutions
 
teepee2Commented:
You can use RRAS (Routing and Remote Access)...
Control Panel --> Administrative Tools --> Routing and Remote access --> Right Click on the server name and choose Configure Routing and Remote Access
The wizard is very self explanitory
0
 
ComputerTechieAuthor Commented:
Will try tomarrow and let you know.

thank you
0
 
centiumCommented:
Here is a complete guide for setting up NAT on a Windows RRAS setup:

http://www.tek-tips.com/faqs.cfm?fid=2347


Hope that helps.
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

Join & Write a Comment

Featured Post

Worried about phishing attacks?

90% of attacks start with a phish. It’s critical that IT admins and MSSPs have the right security in place to protect their end users from these phishing attacks. Check out our latest feature brief for tips and tricks to keep your employees off a hackers line!

Tackle projects and never again get stuck behind a technical roadblock.
Join Now