<div>
yes, that's the driver... No conflicting devices.<br />
<br />
That thread raises a good point though, I'll look for another card to make sure that this one is ok.<br />
<br />
thanks
</div>


yes, that's the driver... No conflicting devices.

That thread raises a good point though, I'll look for another card to make sure that this one is ok.

thanks

<div>
some lite reading<br />
<br />
<a href="http://www.novatelwireless.com/support/files/TSBUMTS_001_EC10_.pdf" rel="ugc">http://www.novatelwireless.com/support/files/TSBUMTS_001_EC10_.pdf</a><br />
<br />
Error 10 leads me to want to look at resources... the PCMCIA card may be grabbing resources not available
</div>


some lite reading

http://www.novatelwireless.com/support/files/TSBUMTS_001_EC10_.pdf [http://www.novatelwireless.com/support/files/TSBUMTS_001_EC10_.pdf]

Error 10 leads me to want to look at resources... the PCMCIA card may be grabbing resources not available

<div>
It turns out that the card is duff. We haven't been able to obtain another card for various internal reasons, but after much testing and researching, that is the only remaining option. thanks for the help!
</div>


It turns out that the card is duff. We haven't been able to obtain another card for various internal reasons, but after much testing and researching, that is the only remaining option. thanks for the help!

<div>
<div class="content wysiwyg-content">
***500 points, as urgent fix needed!***<br />
<br />
I've been given one of the above GPRS card modems (without drivers or anything) and been told to get it working.<br />
<br />
I have found a driver for winXP, but on installation this says 'unable to intialise the device (code 10', I have tried installing it as a 'standard pcmcia card modem', but this brings up the same error message...<br />
<br />
I have tried searching various other forums to no avail. Please help, my boss keeps asking if it's sorted yet!!!
</div>
</div>


***500 points, as urgent fix needed!***

I've been given one of the above GPRS card modems (without drivers or anything) and been told to get it working.

I have found a driver for winXP, but on installation this says 'unable to intialise the device (code 10', I have tried installing it as a 'standard pcmcia card modem', but this brings up the same error message...

I have tried searching various other forums to no avail. Please help, my boss keeps asking if it's sorted yet!!!

Merlin/novatel G201 modem... **500pts, urgent fix needed**

Networking hardware includes the physical devices facilitating the use of a computer network. Typically, networking hardware includes gateways, routers, network bridges, modems, wireless access points, networking cables, line drivers, switches, hubs, and repeaters. But it also includes hybrid network devices such as multilayer switches, protocol converters, bridge routers, proxy servers, firewalls, network address translators, multiplexers, network interface controllers, wireless network interface controllers, ISDN terminal adapters and other related hardware.