REMOVE VLAN ON 2948G LAYER 2 SWITCH RUNNING CATOS

Hi all,

Thanks for helping me so far, its been a tremendous assistance this forum.

I got the erase config all command from here yesterday after discovering that i am actually running CAT OS on my 2948g Layer 2 switch.
i have issued this command now and all seems well bit I am now trying to erase the vlan configuration, this is what i am seeing:

Console> (enable) show vlan
VLAN Name                             Status    IfIndex Mod/Ports, Vlans
---- -------------------------------- --------- ------- ------------------------

1    default                          active    4       2/1-50
1002 fddi-default                     active    5
1003 token-ring-default               active    8
1004 fddinet-default                  active    6
1005 trnet-default                    active    7


VLAN Type  SAID       MTU   Parent RingNo BrdgNo Stp  BrdgMode Trans1 Trans2
---- ----- ---------- ----- ------ ------ ------ ---- -------- ------ ------
1    enet  100001     1500  -      -      -      -    -        0      0
1002 fddi  101002     1500  -      -      -      -    -        0      0
1003 trcrf 101003     1500  0      0x0    -      -    -        0      0
1004 fdnet 101004     1500  -      -      0x0    ieee -        0      0
1005 trbrf 101005     1500  -      -      0x0    ibm  -        0      0


VLAN AREHops STEHops Backup CRF
---- ------- ------- ----------
1003 7       7       off
Console> (enable)
-----------------------------------------------------------------------------------------------------
I have tried the dir flash:  and i get this: open device flash failed (unknown device)   and delete flash:vlan.dat but nothing seems to happen.

Any suggestions ?
JohnBannisterAsked:
Who is Participating?
I wear a lot of hats...

"The solutions and answers provided on Experts Exchange have been extremely helpful to me over the last few years. I wear a lot of hats - Developer, Database Administrator, Help Desk, etc., so I know a lot of things but not a lot about one thing. Experts Exchange gives me answers from people who do know a lot about one thing, in a easy to use platform." -Todd S.

cooleditCommented:
Hi, There

The VLAN's you got left is the default ones they can not be deleted only disabled / Inactive.

Here is a link to tell you howto
http://www.cisco.com/en/US/products/hw/switches/ps607/products_tech_note09186a00800c4546.shtml#reset_vlan

Experts Exchange Solution brought to you by

Your issues matter to us.

Facing a tech roadblock? Get the help and guidance you need from experienced professionals who care. Ask your question anytime, anywhere, with no hassle.

Start your 7-day free trial
It's more than this solution.Get answers and train to solve all your tech problems - anytime, anywhere.Try it for free Edge Out The Competitionfor your dream job with proven skills and certifications.Get started today Stand Outas the employee with proven skills.Start learning today for free Move Your Career Forwardwith certification training in the latest technologies.Start your trial today
Networking

From novice to tech pro — start learning today.