Configuration linksys B 2.4ghz for internet camera


 Dear all,

  I am coming to install an internet digital camera in my lan, it 's a dcs5300g it 's working normally. I am using a wireless router Linksys Broadband b 2.4ghz. I can access the camera in all the post. But when I am at home it's impossible. So I would like to see everything of the office from my computer at home. Note that the cam has 192.168.1.17 for ip adress. How can I configure My router linksys in order to acess the camera by internet. It's really urgent. Help.


thanks very much
petitefilleAsked:
Who is Participating?
I wear a lot of hats...

"The solutions and answers provided on Experts Exchange have been extremely helpful to me over the last few years. I wear a lot of hats - Developer, Database Administrator, Help Desk, etc., so I know a lot of things but not a lot about one thing. Experts Exchange gives me answers from people who do know a lot about one thing, in a easy to use platform." -Todd S.

kbbcnetCommented:
What model Linksys router? How is it configured now? NAT/PAT? What port, if any does the camera use?

<How can I configure My router linksys in order to acess the camera by internet. It's> <really urgent. Help.>

Easy config:
http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=1650

Example cam requiring specific port redirection:
http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=485

You may need to setup port forwarding or redirection/triggering:
http://www.linksys.com/support/support.asp?spid=96
http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=568
http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=344
------------------------------------------------

*Dlink recommends locking down the TX rate to 11Mbps [default is 22Mb].
Wireless Bridging/Repeating:
http://support.dlink.com/SupportFAQ/default.asp?model=DCS%2D5300G

DCS-5300G support/knowledge base
http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_alp.php?p_sid=NjatVUJh

Emulator to test your 5300G config:
http://support.dlink.com/emulators/dcs5300g/parentmain.html
-------------------------------------------------

<Note that the cam has 192.168.1.17 for ip adress.>
Is you Linksys router 192.168.1.1?

If not, see the following setup.
http://support.dlink.com/SupportFAQ/default.asp?model=DCS%2D5300G
http://support.dlink.com/products/view.asp?productid=DCS%2D5300G

Experts Exchange Solution brought to you by

Your issues matter to us.

Facing a tech roadblock? Get the help and guidance you need from experienced professionals who care. Ask your question anytime, anywhere, with no hassle.

Start your 7-day free trial
It's more than this solution.Get answers and train to solve all your tech problems - anytime, anywhere.Try it for free Edge Out The Competitionfor your dream job with proven skills and certifications.Get started today Stand Outas the employee with proven skills.Start learning today for free Move Your Career Forwardwith certification training in the latest technologies.Start your trial today
Routers

From novice to tech pro — start learning today.