DivSol
asked on
PIX to PIX VPN - DHCP and Domain Problems
Hey guys,
I think I am having trouble with my firewalls. I can't seem to obtain anything from the DHCP server (which is on the 20.0 subnet) if they are outside the subnet 20.0. In addition none of the servers/computers outside the subnet 20.0 can join the domain either. Is it possible that the firewalls are blocking the traffic. I am not a PIX guy by any means. So any help resolving the problem would be a great help.
Here are both of my configs from my firewalls.
http://wedestroyed.com/configs/506e.rtf
http://wedestroyed.com/configs/515e.rtf
Also here is a quick diagram of how the topology is set up.
0.0 Subnet <-----> PIX 506e <---------VPN----------> PIX 515e <------------> Inside 20.0 Subnet
|
|
DMZ
10.0 Subnet
Thanks
I think I am having trouble with my firewalls. I can't seem to obtain anything from the DHCP server (which is on the 20.0 subnet) if they are outside the subnet 20.0. In addition none of the servers/computers outside the subnet 20.0 can join the domain either. Is it possible that the firewalls are blocking the traffic. I am not a PIX guy by any means. So any help resolving the problem would be a great help.
Here are both of my configs from my firewalls.
http://wedestroyed.com/configs/506e.rtf
http://wedestroyed.com/configs/515e.rtf
Also here is a quick diagram of how the topology is set up.
0.0 Subnet <-----> PIX 506e <---------VPN----------> PIX 515e <------------> Inside 20.0 Subnet
|
|
DMZ
10.0 Subnet
Thanks
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER