dissolved
asked on
Hard disk error
Found this message in my fileserver.
(Lost Delayed-Write Data) The system was attempting to transfer file data from buffers to \Device\HarddiskVolume5. The write operation failed, and only some of the data may have been written to the file.
What does it mean? And how do I track down which hard drive is the problem?
I have in the system:
-one IDE system drive
-one IDE data drive
-2 SATA drives connected to a raid controller
Thanks
(Lost Delayed-Write Data) The system was attempting to transfer file data from buffers to \Device\HarddiskVolume5. The write operation failed, and only some of the data may have been written to the file.
What does it mean? And how do I track down which hard drive is the problem?
I have in the system:
-one IDE system drive
-one IDE data drive
-2 SATA drives connected to a raid controller
Thanks
SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
I was viewing your problem of resetting the PIX router and having a TFTP timeout issue - you were helped by others and you got it to work. But you failed to post the final steps by which you got it resolved.
Please have the courtesy of posting the solution the same way others in this forum help you.
That is that way you can take fair part in this community.
https://www.experts-exchange.com/questions/21319493/pix-501-password-reset.html
Other members: Sorry about this out-of-topic post but I could not find a way to let Dissolved know.