icarus004
asked on
Asterisk Hardware Reccomendations
I have a small branch office with 3 POTs lines and an aging key system. I am thinking about replacing this system with asterisk and am looking for some reccomendations. There are 3 POTs lines and I want then to terminate into the asterisk box. I want those lines to be available to all phones so when an employee makes a call it will grab an available line.
I'm looking for reccomendations on hardware to interface between the phone company and asterisk and asterisk to the telepohe set.
TELCO <---> Asterisk <---> Telephone
Thanks in advance!
I'm looking for reccomendations on hardware to interface between the phone company and asterisk and asterisk to the telepohe set.
TELCO <---> Asterisk <---> Telephone
Thanks in advance!
I would suggest using a Sangoma 4 PORT FXO Card for the POTS Connection. For the end users your probably best off going with a decent IP phone. You also may want to look at the NEW Sipura 9000. IT's not quite out, but from what I understand it's a SME IP-PBX and I doubt it's to pricy.
ASKER
Is this the model FXO card you are talking about?
http://www.telephonyware.com/telephonyware/tw00031.html?id=IEd5ntyU
http://www.telephonyware.com/telephonyware/tw00031.html?id=IEd5ntyU
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.