troubleshooting Question

SonicFirewall/50 with Static IP

Avatar of Daren Anderson, MSIS
Daren Anderson, MSISFlag for United States of America asked on
Software Firewalls
3 Comments1 Solution498 ViewsLast Modified:
This was all installed before I arrived here so just trying to figure it all out.  We have an older SonicWall/50 that is between our cable modem and our network switches.  We were given a block of (5) Static IP Addresses from our ISP.  In the SonicWall, we have DHCP enabled.  I have been told we need to set our server to use one of those (5) IP addresses.  Right now, there is a NT 4.0 server which is the PDC on one domain and then a Win2K member server on that same domain - both have addresses of for one and for the other - this is setup in the TCP/IP config.  I also have a new 2003 server with an IP address of  

Do I need to setup the static IP addresses in the SonicWall or do I need to put this on the server?  According to our ISP, our usable IP's are -  Not really sure how to proceed on this one.  Thanks.

Our community of experts have been thoroughly vetted for their expertise and industry experience.

Join our community to see this answer!
Unlock 1 Answer and 3 Comments.
Start Free Trial
Learn from the best

Network and collaborate with thousands of CTOs, CISOs, and IT Pros rooting for you and your success.

Andrew Hancock - VMware vExpert
See if this solution works for you by signing up for a 7 day free trial.
Unlock 1 Answer and 3 Comments.
Try for 7 days

”The time we save is the biggest benefit of E-E to our team. What could take multiple guys 2 hours or more each to find is accessed in around 15 minutes on Experts Exchange.

-Mike Kapnisakis, Warner Bros