netcentraltech
asked on
pix multi port NAT
Hi Guys
I have a requirement to NAT ports 10,000 20,000 from the outside interface to an internal ip address on a pix 506e. I can manage single mappings using access lists and static commands for smtp for instance, but dont know how to specify a whole block of ports. Any way to do this ?
Thanks in anticipation
Les
I have a requirement to NAT ports 10,000 20,000 from the outside interface to an internal ip address on a pix 506e. I can manage single mappings using access lists and static commands for smtp for instance, but dont know how to specify a whole block of ports. Any way to do this ?
Thanks in anticipation
Les
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
Pete
Yep that is indeed what he wants to one host on the internal network i.e. 192.168.1.100 so I presume I must make astatic map as well ?
Les
Yep that is indeed what he wants to one host on the internal network i.e. 192.168.1.100 so I presume I must make astatic map as well ?
Les
ASKER
A very good point. I will contact the owner to verify....
Thanks
Les